Power windows
The power window switches are located in the console. To operate, turn the key in the ignition switch to the ACC or ON/RUN position. Press the switch in to the resis- tance point to open; release the switch when the window is in the desired position. For express opening of windows, press the switch past the resistance point and release; the window lowers to the fully open position. To interrupt the procedure, briefly press the switch again and release. When closing the windows, be sure that there is no danger of anyone being harmed by the closing proce- dure.
WARNING! When leaving the vehicle, always remove the key from the ignition switch, and lock the vehicle. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Unsupervised use of vehicle equipment can cause serious personal injury.
Power Window Operation With The Convertible Top Switch (Roadster Only)
The power windows can also be operated by using the convertible top switch. To operate, turn the key in the ignition switch to the ON/RUN position. Press down on the rear of the con- vertible top switch twice to open the windows. Press down on the front of the convertible top switch twice to close the windows.
Rear liftgate/decklid release
You can open the rear liftgate/decklid by using the handle located on the liftgate/decklid just above the rear license plate pocket.
WARNING! Do not allow children to have access to the rear cargo area by climbing into the rear cargo area from out- side. Always close the liftgate/decklid when your vehicle is unattended. Once in the cargo area, young children may have difficulty leaving the vehicle. If trapped in the cargo area, children can die from suffocation or heat stroke.
Download Manual