Additional Storage Features
Cargo Management System
Lift the load floor to access the cargo management system.
The hold open devices on the cargo bin allow the load floor to remain open without removal.
The cargo management system is used to organize storage in the cargo area. There are two convenience hooks that can support up to 5 kg (11 lb.). After storing items in the cargo management system, make sure to properly latch the load floor.
Removal Procedure
To access the spare tire, the cargo management system must be removed.
1. Remove the load floor. Open the load floor approximately 70% and pull upward and outward to release the two hooks from the rod affixed to the cargo management system.
2. Remove the four wing nuts.
3. Lift up on the handles on both sides to remove the cargo management system to access the spare tire.
4. The load floor and storage bin can be placed on the lowered third row seats while accessing the spare tire.
Installation Procedure
1. Install the cargo management system in the vehicle.
2. Install the four wing nuts.
3. Angle the load floor approximately 70%, align the two hooks on the load floor above the rod, and push the load floor until the hooks engage the cargo bin rod.
4. Make sure to properly latch the load door.
Warning Triangle
If equipped, the warning triangle is stored in the rear of the vehicle.
Download Manual