Instrument cluster
Warning lights inform the driver of malfunctions in the indicated vehi- cle’s systems.
*1
(U.S.A.)
*1
(Canada)
*1
*1
(U.S.A.)
*1
(Canada)
*1
*1
(U.S.A.)
*1
(Canada)
Brake system warning light (P. 481)
Brake system warning light (P. 481)
Charging system warn- ing light (P. 481)
Malfunction indicator lamp (P. 481)
Malfunction indicator lamp (P. 481)
SRS warning light (P. 481)
ABS warning light (P. 482)
ABS warning light (P. 482)
Low fuel level warning light (P. 482)
*1
*1, 3
(U.S.A.)
*1, 3
(Canada)
*1
*1, 2
*1, 5
*2, 4, 5
(Yellow)
*4
Seat belt reminder light (P. 482)
Master warning light (P. 482)
Parking brake warning light (P. 482)
Parking brake warning light (P. 482)
Tire pressure warning light (P. 483)
Slip indicator (P. 483)
PCS warning light (P. 484)
LDA indicator (P. 484)
High engine coolant tem- perature warning light (P. 490)
*4
Low windshield washer fluid warning light
(P. 491)
*4
Low fuel level warning light (P. 491)
*4
*4, 5
Brake Override System/ Drive-Start Control warn- ing light (P. 492, 495)
Automatic High Beam indicator (P. 495)
*1: These lights turn on when the engine switch is turned to ON to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if the lights do not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer for details.
*2: The light comes on to indicate a malfunction.
*3: The light flashes to indicate a malfunction.
*4: The light illuminates on the multi-information display.
*5: If equipped
Turn signal indicator (P. 232)
*9
Automatic High Beam
indicator (P. 239)
(U.S.A.)
(Canada)
Headlight indicator (P. 234)
Tail light indicator (P. 234)
*1
(U.S.A.)
*1
(Canada)
Parking brake indicator (P. 233)
Parking brake indicator (P. 233)
Headlight high beam
*6, 9
indicator (P. 235)
Cruise control indicator (P. 289, 294)
*6
*6, 9
(Green)
*1, 5
Cruise control “SET” indicator (P. 289, 294)
LDA indicator (P. 275)
Front fog light indicator (P. 244)
“AIR BAG ON” and “AIR BAG OFF”
*3, 4, 9
*1
*9
BSM outside rear view mirror indicator
(P. 305)
“TRAC OFF” indicator (P. 321)
“RCTA” indicator (P. 305)
Security indicator (P. 85, 95)
indicators (P. 53)
*1
“AUTO LSD” indicator
(P. 318, 321)
*6, 9
*1, 2
*1
*9
Dynamic radar cruise control indicator
(P. 280)
Slip indicator ( P. 321)
VSC off indicator (P. 318, 321)
“TOW HAUL” indicator (P. 228)
“BSM” indicator (P. 305)
*1, 8, 9
(4WD models)
(4WD models)
*6
(Green)
*6, 7
PCS warning light (P. 263)
“4HI” indicator (P. 315)
“4LO” indicator (P. 315)
Trailer connection indicator (P. 327)
Low outside temperature indicator
*1: These lights turn on when the engine switch is turned to ON to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if the lights do not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer for details.
*2: The light flashes to indicate that the system is operating.
*3: In order to confirm operation, the BSM outside rear view mirror indicators illuminate in the following situations:
If the system is functioning correctly, the BSM outside rear view mirror indi- cators will turn off after a few seconds.
If the BSM outside rear view mirror indicators do not illuminate or do not turn off, there may be a malfunction with the system.
If this occurs, have the vehicle inspected by your Toyota dealer.
*4: The light illuminates on the outside rear view mirrors.
*5: The light illuminates on the center panel.
*6: The light illuminates on the multi-information display.
*7: When the outside temperature is approximately 37°F (3°C) or lower, the indicator will flash for 10 times, then comes on.
*8: The light comes on when the system is turned off.
*9: If equipped
Displays the engine speed in revolutions per minute
Engine oil pressure gauge Displays the engine oil pressure Outside temperature display
Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C). Low outside temperature indicator comes on when the ambient temperature is 37°F (3°C) or lower.
Displays the charge state
Displays the vehicle speed
Switches between odometer and trip meter displays. Pushing and holding the button will reset the trip meter when the trip meter is being displayed.
Displays the quantity of fuel remaining in the tank.
Displays the selected shift position or selected shift range. (P. 225)
Displays the following items. Odometer:
Displays the total distance the vehicle has been driven.
Trip meter:
Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different dis- tances independently.
Presents the driver with a variety of driving-related data. (P. 111) Displays warning messages in case of a malfunction. (P. 489) Engine coolant temperature gauge
Displays the engine coolant temperature.
Pressing the button switches
between odometer and trip meter.
Displays the total distance the vehicle has been driven.
Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and dis- play different distances independently.
*: Press and hold the display change button to reset.
Pressing the button will adjust brightness of the instrument panel light.
The brightness of the instrument panel lights can be adjusted by pressing the button.
Short press: 1 step change of brightness level.
Long press: continues change of brightness level until released.
The engine switch is in ON.
When the tail lights are turned on, the display’s brightness will be reduced slightly unless the meter brightness level adjustment is set to the brightest setting.
Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.
NOTICE
When the voltmeter indicates 19 V or higher or 9 V or lower while the engine is running, there may be a battery or charging system malfunction. Have the vehicle inspected at your Toyota dealer.
When the value of the engine oil pressure gauge drops while the engine is running, stop the vehicle in a safe place immediately and check the amount of engine oil. (P. 416)
When the oil pressure drops even though the engine oil amount has not decreased, or if the oil pressure does not increase when engine oil is added, contact your Toyota dealer, as there may be a problem with the lubri- cation system.
Displays the following informa- tion when an icon is selected.
Some of the information may be displayed automatically depending on the situation.
Drive information
Select to display various drive data. (P. 111)
Select to display the following navigation system-linked information.
Select to enable selection of an audio source or track on the meter using the meter control switches.
Select to display the operational status of the following systems:
Select to display warning messages and measures to be taken if a malfunction is detected. (P. 489)
Select to change the meter display settings. (P. 112)
*: If equipped
Press and hold: Resets
Switch menu/Displays the top screen
Returns to the previous screen
Displays the average fuel consumption since the function was reset, the vehicle was refueled, or the engine was started, respec- tively
Use the displayed average fuel consumption as a reference.
Displays the estimated maximum distance that can be driven with the quantity of fuel remaining, the distance driven after the engine was started or the distance since the function was reset, respec- tively.
When refueling, turn the engine switch off. If the vehicle is refueled with- out turning the engine switch off, the display may not be updated.
Displays the current rate of fuel consumption
Displays the average since engine was started or the average since the function was reset, respectively
Displays the engine was started or the elapsed time since the func- tion was reset, respectively
Displays the distance since the engine was started
A blank screen is displayed
*: Resetting procedures:
The settings of the following items can be changed, refer to P. 560. For functions that can be enabled or disabled, the function switches between on and off each time is 
pressed.
Select to set up the LDA (Lane Departure Alert) sensitivity.
Select to enable/disable the Sway warning function.
Select to set up the sway warning sensitivity.
Select to enable/disable the PCS (Pre-Collision System) function.
Select to set up the PCS (Pre-Collision System) sensitivity.
Select to enable/disable the Blind Spot Monitor function.
Select to enable/disable the Rear Cross Traffic Alert function.
Select to set up the BSM (Blind Spot Monitor) outside rear view mirror indicators brightness.
Select to set up the RCTA (Rear Cross Traffic Alert) warning buzzer vol- ume.
Select to set up the trailer brake type.
Select to reset the message after the required maintenance is per- formed.
Select to change the language on the display.
Select to change the unit of measure for fuel consumption and tempera- ture.
You can register 1 screen as the top screen. To register, press and hold while the desired screen is displayed.
There are also screens that cannot be setup as the Top Screen.
Select to select up to 2 items that will be displayed on a Drive informa- tion screen, up to 2 Drive information screens can be set.
Select to set the following pop-up displays, which may appear in some situations, on/off.
Select to change the accent colors on the screen, such as the menu icon color.
Registered or changed meter settings will be deleted or returned to their default setting.
*1: If equipped
*2: For vehicles sold in the U.S.A.
Also, the settings screen is temporarily canceled in the following situations.
In some situations, such as when a switch operation is performed, a pop-up display will be temporarily displayed on the multi-information display.
The drive information will be reset.
When the engine switch is turned off, each of the following will be displayed on the multi-information display, and will clear after approximately 30 sec- onds.
Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.
Audio
Premium Audio and Audio Plus
Press the “APPS” button, and then select “Eco” on the screen.
If the “Past Record” screen is displayed, select “Trip Information”.
Resetting the consumption data
Average vehicle speed since the engine was started
Elapsed time since the engine was started
Fuel consumption in the past 15 minutes
Cruising range (P. 118) Current fuel consumption
Average fuel consumption for the past 15 minutes is divided by color into past averages and averages attained since the engine switch was last turned to ON. Use the displayed average fuel con- sumption as a reference.
These images are examples only.
*: If equipped
If the “Trip Information” screen is displayed, select “Past Record”.
Resetting the past record data
Best recorded fuel consump- tion
Average fuel consumption (if equipped)
Previous fuel consumption record
Update the average fuel consumption data
The average fuel consumption history is divided by color into past averages and the average fuel consumption since the last updated. Use the displayed average fuel consumption as a reference.
These images are examples only.
The fuel consumption data can be deleted by selecting “Clear”.
Update the average fuel consumption by selecting “Update” to measure the current fuel consumption again.
Displays the estimated maximum distance that can be driven with the quan- tity of fuel remaining.
This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.
Operation of each component
Keys 120
Side doors 127
Tailgate 133
Smart key system. 138
Front seats 147
Rear seats 150
Driving position memory (driver’s seat) 152
Head restraints 157
Steering wheel 161
Inside rear view mirror. 164
Outside rear view mirrors 167
3
Power windows 172
Back window 175
Power back window 176
Moon roof 179