Headlamp levelling
Headlamp levelling switch*
The angle of the headlamp beam varies depending on the load carried by the vehicle. The headlamp levelling switch can be used to adjust the headlamp illumination distance (when the lower beam is illuminated) so that the headlamps’ glare does not distract other drivers. Set the switch according to the following table.
CAUTION
Always perform adjustments before driving. Do not attempt to adjust while driving, as it could cause an accident.
* : 1 person
Full luggage loading
Switch position 0- Driver only/Driver + 1 front passenger
Switch position 1- 5 passengers (including driver)
Switch position 2- 5 passengers (including driver) + Full luggage loading
Switch position 3- Driver + Full luggage loading
Automatic headlamp levelling*
This mechanism automatically adjusts the direction of the headlamps (beam position) depending on changes in the condition of the vehicle, such as the number of occupants or luggage weight. When the headlamps are illuminated with the ignition switch in the “ON” position, the beam position of the headlamps is automatically adjusted when the vehicle is stopped.
Headlamp automatic levelling system warning display
Type 1
Type 2
If there is a fault in the automatic headlamp levelling system, the warning display is displayed on the information screen in the multi-information display.
CAUTION
If the warning is displayed, the system may be malfunctioning. Have the vehicle inspected by a MITSUBISHI MOTORS Authorized Service Point.
Turn-signal lever
1- Turn-signals When making a normal turn, use position (1). The lever will return automatically when cornering is completed.
2- Lane-change signals When moving the lever to (2) slightly to change a lane, the turn-signal lamps and indication lamp in the instrument cluster will only flash while the lever is operated. Also, when you move the lever to (2) slightly then release it, the turn-signal lamps and indication lamp in the instrument cluster will flash 3 times.
NOTE
- If the lamp flashes unusually quickly, the bulb in a turn-signal lamp may have burned out. We recommend you to have the vehicle inspected.
- It is possible to activate the following functions. For further information, we recommend you to consult a MITSUBISHI MOTORS Authorized Service Point.
On vehicles equipped with MITSUBISHI Multi-Communication System (MMCS), screen operations can be used to make the adjustment. Refer to the separate owner’s manual for details.
• Flashing of the turn-signal lamps when the lever is operated with the ignition switch in the “ACC” position.
• Deactivate the turn-signal lamp 3-flash function for lane changes - You can adjust the time required to operate the lever for the 3-flash function. For further information, we recommend you to consult a MITSUBISHI MOTORS Authorized Service Point.
Download Manual