Fog Light Bulbs*
When replacing, use the following bulbs.
Fog Light: 35 W (H8 for halogen bulb type)*
Fog Light: LED type
Models with halogen fog lights
- Remove the clips using a flat-tip screwdriver, and push up the under cover.
- Push the tab to remove the coupler.
- Rotate the old bulb counter-clockwise on driver side and clockwise on passenger side to remove.
- Insert a new bulb into the fog light assembly and turn it clockwise on driver side and counter-clockwise on passenger side.
- Insert the coupler into the connector of the bulb.
* Not available on all models
Models with LED fog lights
Fog lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Models with halogen fog lights
Insert a flat-tip screwdriver, lift and remove the center pin to remove the clip.
Insert the clip with the center pin raised, and push until it is flat.
Models with halogen fog lights
NOTICE
Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.
When replacing a halogen bulb, handle it by its plastic case, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.
Side Turn Signal/Emergency Indicator Lights*
Door mirror side turn lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
* Not available on all models
Download Manual