Brightness Control
When the ignition switch is in ON (2)*1, you can use the (select/reset) knob to adjust instrument panel brightness.
Brighten: Turn the knob to the right.
Dim: Turn the knob to the left.
You will hear a beeper when the brightness reaches minimum or maximum. Several seconds after you have adjusted the brightness, you will be returned to the previous screen.
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
The brightness of the instrument panel will be reduced when the following conditions:
- The ignition switch is in ON (2)*1.
Models without automatic lighting control
- The parking lights are turned on.
Models with automatic lighting control
- The light switch is in any position other than off and it is dark outside.'
To cancel the reduced instrument panel brightness when the exterior lights are on, turn the knob to the right until the brightness display is up to max, the beeper sounds.
The brightness can be set differently for when the exterior lights are on, and when they are off.
■ Brightness level indicator
The brightness level is shown on the information display/multi-information display while you are adjusting it.
Download Manual