Disclaimer: Not affiliated with or endorsed by Ford Motor Company. For informational purposes only. Full Disclaimer
You Might Also Need These Items
- Eliminate vibration, excessive bearing wear, and possible structural failure of lugs caused by Non Hub Centric Wheels.
- Hub Ring Internal Diameter (ID) (Match to Vehicle Hub Diameter) : 70.50mm
- Hub Ring Outer Diameter (OD) (Match to Wheel Center Bore Diameter) : 83.00mm
Check price on
- Specification - Wheel Hub Bore/Outer Diameter: 73.1 ; Vehicle Hub Bore/Inner Diameter: 70.3 ; Depth: 10mm;
- Material - Made from high quality materials of Aluminum and offer a tighter fit
- Advantage - Reduce vibration, ensure a snug fit wheel and vehicles hub
Check price on
- Eliminate vibration, excessive bearing wear, and possible structural failure of lugs caused by Non Hub Centric Wheels.
- Hub Ring Internal Diameter (ID) (Match to Vehicle Hub Diameter) : 70.50mm
- Hub Ring Outer Diameter (OD) (Match to Wheel Center Bore Diameter) : 72.56mm
Check price on
- Fitment: Fits Ford Mustang, Ranger, Explorer, Crown Vic, GT, Bronco, Edge, Lincoln Continental, Mark, MKX, Mazda with 5x4.5" Bolt Pattern / Bolt Circle. 70.5mm Hub Centric to vehicle hub and 70.5mm wh...
- Widen your vehicle base and give your vehicle a more aggressive stance while improving handling and stability. Increase tire clearance, fix brake caliper clearance issues, allow installation of lift/l...
- Kit Includes 2 Anodized, Precision machined 6061-T6 Aircraft Grade Aluminum adapters with heat treated, hardened Grade 10.9-wheel studs and matching black, dual coated lugs. Anodized surface provides...
Check price on
- Eliminate vibration, excessive bearing wear, and possible structural failure of lugs caused by Non Hub Centric Wheels.
- Hub Ring Internal Diameter (ID) (Match to Vehicle Hub Diameter) : 70.50mm
- Hub Ring Outer Diameter (OD) (Match to Wheel Center Bore Diameter) : 73.00mm
Check price on
- 🚗Specification - Outside Diameter (O.D.) 73.1mm - Your wheel's center bore needs to be this size; Inner Diameter (I.D.) 70.3mm - Your vehicle's hub lip diameter needs be this size; Depth: 10mm.
- 🚗Benefits - ①These hubrings will reduce vibrations caused by a gap between your aftermarket wheel's centerbore and your wheel hub; ②Other aftermarket rims can be replaced; ③ Easy to Install;
- 🚗Fitment - 1998-2009 for B4000, 1984-2000 for Corvette, 1983-1994 for S10 Blazer, 1995-2004 for Town Car, 1995-2000 for Jimmy, 1982-1987 for El Camino, 1995-2007 for Explorer, 1982-1990 for S15, 1964-...
Check price on
- Precision machined 6061-T6 Aircraft Grade Aluminum spacers / adapters with heat treated, hardened Grade 12.9-wheel studs and matching black, dual coated lugs. Anodized surface provides corrosion resis...
- Anodized surface provides corrosion resistance.
- Widen your vehicle base and give your vehicle a more aggressive stance while improving handling and stability. Increase tire clearance, fix brake caliper clearance issues, allow installation of lift/l...
Check price on
- Specs: 2 Wheel Adapters / Spacers Vehicle Bolt Pattern 5 x 114.3mm (5 x 4.50) Wheel Bolt Pattern 5 x 114.3mm (5 x 4.50) Thickness 20mm (0.79") Thread 1/2x20 Center Bore 70.5
- Hub Centric to the vehicle and the wheel. Adapter is deemed Hub Centric when the inside diameter exactly matches to the hub, reducing vibration and stress on the lug nuts.
- Adapters are made of Air Craft Quality 6061-T6 Aluminum. 6061 aluminum is an alloy that contains magnesium and silicon as its major alloying elements. T6 refers to the heat treatment process that invo...
Check price on
If after replacing the rims you began to notice a strange knocking or rattling noise coming from the suspension, the reason may be that the new rims are not seated tightly enough on the hub. To eliminate this problem, install a hub-centric ring - this will remove excess space and make the rim fit snugly in place, thus eliminating noise and vibration.