2022 Ford F-150 Owners Manual - Glare Free Lighting (If Equipped)

Glare Free Lighting (If Equipped)

HOW DOES GLARE FREE LIGHTING WORK

Glare free lighting enhances visibility and minimizes glare for other road users.

AWithout glare free lighting. BWith glare free lighting.

GLARE FREE LIGHTING PRECAUTIONS

WARNING:  The system does not relieve you of your responsibility to drive with due care and attention. You may need to override the system if it does not adapt the light.    WARNING:  The system may not adapt the lighting to avoid glare if the lights of oncoming vehicles are hidden by obstacles such as guard rails.    WARNING:  You may need to override the system when approaching other road users.    WARNING:  You may need to override the system during inclement weather.    WARNING:  Do not use the system in poor visibility, for example fog, heavy rain, spray or snow.

GLARE FREE LIGHTING REQUIREMENTS

The system turns on if all of the following occur:

• You switch the system on.
• You set the lighting control to the autolamps position.
• The ambient light level is low enough.
• Your vehicle speed is greater than approximately 32 mph (52 km/h).

The system adapts the lighting to avoid glare if all of the following occur:

• You switch the system on.
• You set the lighting control to the autolamps position.
• The system detects an approaching vehicle's headlamps or rear lamps.

GLARE FREE LIGHTING LIMITATIONS

The system turns off if any of the following occur:

• You switch the system off.
• You set the lighting control to any position except autolamps.
• The ambient light level is high enough.
• The system detects severe rain, snow or fog.
• The system detects street lighting.
• The camera has reduced visibility.
• The vehicle speed falls below approximately 19 mph (30 km/h).

Note:   The deactivation speed is lower on curves.

SWITCHING GLARE FREE LIGHTING ON AND OFF

1. Press Settings on the touchscreen.
2. Press Vehicle Settings.
3. Press Lighting.
4. Switch Glarefree Lighting on or off.

GLARE FREE LIGHTING INDICATORS

Illuminates to confirm when the system is ready to assist.

OVERRIDING GLARE FREE LIGHTING



Push the lever away from you to switch the high beams on.

Push the lever away from you again to switch the high beams off.

Push the lever away from you for a third time to switch glare free lighting back on.

Glare Free Lighting

GLARE FREE LIGHTING – INFORMATION MESSAGES