Ride Control Systems
Traction Control/ Electronic Stability Control
System Operation
The vehicle has a Traction Control System (TCS) and StabiliTrak/ Electronic Stability Control (ESC), an electronic stability control system. These systems help limit wheel slip and assist the driver in maintaining control, especially on slippery road conditions. TCS activates if it senses that any of the drive wheels are spinning or beginning to lose traction. When this happens, TCS applies the brakes to the spinning wheels and reduces engine power to limit wheel spin. StabiliTrak/ESC activates when the vehicle senses a difference between the intended path and the direction the vehicle is actually traveling. StabiliTrak/ESC selectively applies braking pressure to any one of the
Chevrolet Impala Owner Manual (GMNA-Localizing-U.S./Canada-13688912) - 2020 - CRC - 6/11/19
164 Driving and Operating
vehicle wheel brakes to assist the driver in keeping the vehicle on the intended path. If cruise control is being used and TCS or StabiliTrak/ESC begins to limit wheel spin, cruise control will disengage. Cruise control may be turned back on when road conditions allow. Both systems come on automatically when the vehicle is started and begins to move. The systems may be heard or felt while they are operating or while performing diagnostic checks. This is normal and does not mean there is a problem with the vehicle. It is recommended to leave both systems on for normal driving conditions, but it may be necessary to turn TCS off if the vehicle gets stuck in sand, mud, ice, or snow. See If the Vehicle Is Stuck 0 147 and “Turning the Systems Off and On” later in this section.
The indicator light for both systems is in the instrument cluster. This light will: . Flash when TCS is limiting
wheel spin. . Flash when StabiliTrak/ESC is
activated. . Turn on and stay on when either
system is not working. If either system fails to turn on or to activate, a message displays in the Driver Information Center (DIC), and d comes on and stays on to indicate that the system is inactive and is not assisting the driver in maintaining control. The vehicle is safe to drive, but driving should be adjusted accordingly. If d comes on and stays on: 1. Stop the vehicle.
2. Turn the engine off and wait 15 seconds.
3. Start the engine. Drive the vehicle. If d comes on and stays on, the vehicle may need more time to diagnose the problem. If the condition persists, see your dealer.
Turning the Systems Off and On
The button for TCS and StabiliTrak/ ESC is on the center console, behind the shift lever.
Caution
Do not repeatedly brake or accelerate heavily when TCS is off. The vehicle driveline could be damaged.
Chevrolet Impala Owner Manual (GMNA-Localizing-U.S./Canada-13688912) - 2020 - CRC - 6/11/19
Driving and Operating 165
To turn off only TCS, press and release g. The Traction Off light i displays in the instrument cluster. To turn TCS on again, press and release g. The Traction Off light i displayed in the instrument cluster will turn off. If TCS is limiting wheel spin when g is pressed, the system will not turn off until the wheels stop spinning. To turn off both TCS and StabiliTrak/ ESC, press and hold g until the Traction Off light i and StabiliTrak/ ESC Off light g come on and stay on in the instrument cluster. To turn TCS and StabiliTrak/ESC on again, press and release g. The Traction Off light i and StabiliTrak/ESC Off light g in the instrument cluster turn off. Adding accessories can affect the vehicle performance. See Accessories and Modifications 0 200.
Download Manual