Interior Lights
CAUTION
When leaving your vehicle, make sure the lights are turned off to avoid battery discharge.
Map lights
1) Door interlock switch
To turn on the map light, push the lens.
To turn it off, push the lens again.
Automatic illumination
When the door interlock switch is in the “DOOR” position, the map lights illuminate automatically in the following cases.
- Any of the doors other than the rear gate is opened.
- The doors are unlocked using the keyless access function (if equipped). Refer to “Locking and unlocking by holding the access key fob” FP124.
- The doors are unlocked using the remote keyless entry system. Refer to “Remote keyless entry system” FP135.
- The ignition switch is turned from the “ON” or “ACC” position to the “LOCK”/ “OFF” position.
Reading light
To turn on the reading light, push the lens. To turn it off, push the lens again.
Automatic illumination
The reading lights illuminate automatically in the following cases, even if the door interlock switch on the map light is in any position.
- Any of the doors other than the rear gate is opened.
- The doors are unlocked using the keyless access function (if equipped). Refer to “Locking and unlocking by holding the access key fob” .
- The doors are unlocked using the remote keyless entry system. Refer to “Remote keyless entry system.
- The ignition switch is turned from the “ON” or “ACC” position to the “LOCK”/ “OFF” position.
Cargo area light
1) DOOR
2) OFF
DOOR: The light illuminates when the rear gate is opened. The light remains illuminated for several seconds and gradually turns off after the rear gate is closed.
OFF: The light remains off.
OFF delay timer
The following lights have an automatic illumination function.
- Reading light
- Map light
- Cargo area light
When the interior light switch is set to the “DOOR” position (except the reading light), the light will automatically turn on and turn off depending on the locking and unlocking of the doors, the opening and closing of the doors including the rear gate, as well as the position of the ignition switch.
NOTE
The setting for the period of time in which the lights remain on (OFF delay timer) can be changed by a SUBARU dealer. Contact your SUBARU dealer for details. For models with the combination meter display, the setting can also be changed by operating the combination meter display. For details, refer to “Menu screens”.
One-touch Interior Illumination function (if equipped)
Push the One-touch Interior Illumination switch once to illuminate the map light (if the map light switch is in the “DOOR” position) and reading light. When the map light and reading light are illuminated by the One-touch Interior Illumination function, the lights will be turned off by one of the following operation.
- Push the One-touch Interior Illumination switch once.
- Push the lock button on the access key fob or transmitter.
- Hold the front door handle and lock it while holding the access key fob (if equipped).
- Push the power rear gate lock switch/ rear lock button while holding the access key fob to lock the rear gate.
NOTE
- When the lights are illuminated using function other than this, the lights will not be turned off even though the One-touch Interior Illumination switch is pushed.
- If the battery drainage prevention function is activated, the map light and reading light will be turned off.