Disclaimer: Not affiliated with or endorsed by Porsche Motor Company. For informational purposes only. Full Disclaimer
You Might Also Need These Items
- Eliminate vibration, excessive bearing wear, and possible structural failure of lugs caused by Non Hub Centric Wheels.
- Hub Ring Internal Diameter (ID) (Match to Vehicle Hub Diameter) : 71.50mm
- Hub Ring Outer Diameter (OD) (Match to Wheel Center Bore Diameter) : 73.00mm
Check price on
- Eliminate vibration, excessive bearing wear, and possible structural failure of lugs caused by Non Hub Centric Wheels.
- Hub Ring Internal Diameter (ID) (Match to Vehicle Hub Diameter) : 71.50mm
- Hub Ring Outer Diameter (OD) (Match to Wheel Center Bore Diameter) : 83.00mm
Check price on
- NOT HUB CENTRIC. These spacers will not center to the Vehicle Hub or Wheel Hub. EXPECT SOME PLAY in the spacer fitment when put over the studs/bolts.
- Universal Fit: 5 x 108mm (5 x 4.25), 5 x 110mm, 5 x 112mm, 5 x 114.30mm (5 x 4.50), 5 x 115mm, 5 x 120.65mm (5 x 4.75), 5 x 120mm, 5 x 127mm (5 x 5.00), 5 x 130mm, 5 x 135mm
- Spec: OD: 164mm (6.46") | ID: 90mm (3.58") | Thickness: 8mm (5/16") | Quantity: 2
Check price on
- Eliminate vibration, excessive bearing wear, and possible structural failure of lugs caused by Non Hub Centric Wheels.
- Hub Ring Internal Diameter (ID) (Match to Vehicle Hub Diameter) : 87.10mm
- Hub Ring Outer Diameter (OD) (Match to Wheel Center Bore Diameter) : 72.56mm
Check price on
- Valve caps can protect the valve, prevent the water, dust or sand into the tire; preventing the valve from leaking, ensure the safe driving.
- Easy to install, 12pcs valve stem caps, it's can easily tightened use your hand. Beautiful appearance, fits vehicles of various colors.
- The valve cap is made of good quality and durable aluminum alloy, enhanced seal to help prevent air leakage.
Check price on
If after replacing the rims you began to notice a strange knocking or rattling noise coming from the suspension, the reason may be that the new rims are not seated tightly enough on the hub. To eliminate this problem, install a hub-centric ring - this will remove excess space and make the rim fit snugly in place, thus eliminating noise and vibration.