2020 Mazda CX-30 Owners Manual - Switches and Controls

Switches and Controls

Lighting Control

Headlights

Turn the headlight switch to turn the headlights and other exterior lights on or off.

When the taillights, parking lights, license plate lights, and the side-marker lights are turned on, the lights-on indicator light in the instrument cluster turns on.

• If the light switch is left on, the lights will automatically switch off approximately 30 seconds after switching the ignition off.

  The time setting can be changed.

  Refer to the Settings section in the Mazda Connect Owner's Manual.

• To prevent discharging the battery, do not leave the lights on while the engine is off unless safety requires them.

Without auto-light control

Ignition Position	ACC or OFF			ON
Switch Position	OFF			OFF
Headlights	Off	Off	Off*1	Off	Off	On
Daytime running lights	Off	Off	Off	On*2	On*2*3	Off
Taillights Parking lights License plate lights Side-marker lights	Off	On*1	On*1	Off	On	On

1. The lights are turned on for the specified period by the auto headlight off function.

2. When the light switch is switched to a different position from the OFF,  position while the vehicle is stopped, the daytime running lights turn off. When starting to drive the vehicle, the daytime running lights turn on again.

3. When the light switch is switched to the OFF position, and then to the  position again, the daytime running lights turn off directly after starting the engine. The daytime running lights turn on when you begin driving the vehicle.

With auto-light control

Ignition Position	ACC or OFF				ON
Switch Position	OFF*1	AUTO			OFF*1	AUTO
Headlights	Off	Off*2	Off	Off*2	Auto*3*5		Auto*4*5	On
Daytime running lights	Off	Off	Off	Off				Off
Taillights Parking lights License plate lights Side-marker lights	Off	Off*2	On*2	On*2				On

1. The light switch returns to the AUTO position automatically.

2. The lights are turned on continuously if the ignition is switched from ON to any other position with the lights turned on. The lights are turned on for the specified period by the auto headlight off function.

3. During the daytime, the daytime running lights turn on automatically. During the nighttime, the headlights, parking lights, taillights, license plate lights, and the side-marker lights turn on automatically.

4. During the daytime, the daytime running lights, parking lights, taillights, license plate lights, and the side-marker lights turn on automatically. During the nighttime, the headlights, parking lights, taillights, license plate lights, and the side-marker lights turn on automatically.

5. When the light switch is switched to the OFF position while the vehicle is stopped, all of the lights that are turned on turn off. When the light switch is switched from a position other than  to the  position while the vehicle is stopped, the running lights or the headlights turn off. When starting to drive the vehicle, the lights that are turned off turn on again.

Auto-light control (Some Models)

When the headlight switch is in a position other than  and the ignition is switched ON, the light sensor senses the surrounding lightness or darkness and automatically turns the headlights and other exterior lights on or off.

• Do not shade the light sensor by adhering a sticker or a label on the windshield. Otherwise the light sensor will not operate correctly.

  

• The light sensor also works as a rain sensor for the auto-wiper control. Keep hands and scrapers clear of the windshield when the wiper lever is in the AUTO position and the ignition is switched ON as fingers could be pinched or the wipers and wiper blades could be damaged when the wipers activate automatically. If you are going to clean the windshield, be sure the wipers are turned off completely when it is particularly tempting to leave the engine running. This is particularly important when clearing ice and snow. 

• The headlights and other exterior lights may not turn off immediately even if the surrounding area becomes well-lit because the light sensor determines that it is night time if the surrounding area is continuously dark for several minutes such as inside long tunnels, traffic jams inside tunnels, or in indoor parking lots.

• If the headlight switch and the windshield wiper switch are in AUTO, and the wipers are operated at low or high speed by the auto wiper control for several seconds, bad weather conditions are determined and the headlights may be turned on.

• The sensitivity of the auto-light control may be changed.

  Refer to the Settings section in the Mazda Connect Owner's Manual.

Headlight High-Low Beam

The headlights switch between high and low beams by moving the lever forward or backward.

1. High beam

2. Low beam

When the headlight high-beams are on, the headlight high-beam indicator light is turned on.

Flashing the Headlights

The headlights can be flashed with the ignition switched to ON.

To flash the headlights, pull the lever fully towards you (the headlight switch does not need to be on).

1. OFF

2. Headlight flashing

The headlight high-beam indicator light in the instrument cluster illuminates simultaneously. The lever will return to the normal position when released.

Coming Home Light

The coming home light turns on the headlights (low beams) when the lever is operated.

To turn on the lights

When the lever is pulled with the ignition switched to ACC or OFF, the low beam headlights turn on.

The headlights turn off after a certain period of time has elapsed after all of the doors are closed.

• The time until the headlights turn off after all of the doors are closed can be changed.

  Refer to the Settings section in the Mazda Connect Owner's Manual.

• If no operations are done for 3 minutes after the lever is pulled, the headlights turn off.

• The headlights turn off if the lever is pulled again while the headlights are illuminated.

Leaving Home Light

The leaving home light turns on the lights when the transmitter unlock button is pressed while away from the vehicle.

The following lights turn on when the leaving home light is operated.

Low beams, Parking lights, Taillights, License plate lights.

To turn on the lights

When the ignition switch and the headlight switch are in the following conditions, the headlights will illuminate when the transmitter unlock button is pressed and the vehicle receives the transmitter signal. The headlights turn off after a certain period of time has elapsed (30 seconds).

• Ignition switch: off

• Headlight switch: AUTO, , or 

1. Lock button

2. Unlock button

• Operation of the leaving home light can be turned on or off.

  Refer to the Settings section in the Mazda Connect Owner's Manual.

• When the transmitter lock button is pressed and the vehicle receives the transmitter signal, the headlights turn off.

• When the headlight switch is turned to the OFF position, the headlights turn off.

Headlight Leveling

The number of passengers and weight of cargo in the luggage compartment change the angle of the headlights.

Auto type

The angle of the headlights will be automatically adjusted when turning on the headlights.

A system malfunction or operation conditions are indicated by a warning.

Refer to Exterior Light Warning Indication/Warning Light (Search).

Manual type

When adjusting the illumination angle of the headlights, refer to the Settings section in the Mazda Connect Owner's Manual.

Select the proper headlight angle from the following chart.

×: Yes

―: No

Daytime Running Lights

Some countries require moving vehicles to have their lights on (daytime running lights) during the daytime.

The daytime running lights turn on automatically.

(Except Canada)

The daytime running lights can be deactivated.

Refer to the Settings section in the Mazda Connect Owner's Manual.

Turn and Lane-Change Signals

Turn and Lane-Change Signals

The ignition must be switched ON to use the turn and lane-change signals.

Turn Signals

Move the signal lever down (for a left turn) or up (for a right turn) to the stop position. The signal will self-cancel after the turn is completed.

If the indicator light continues to flash after a turn, manually return the lever to its original position.

1. Right turn

2. Right lane change

3. OFF

4. Left lane change

5. Left turn

The turn signal indicators in the instrument cluster flash according to the operation of the turn signal lever to show which signal is working.

• There may be a problem with the turn signal lights if they do not flash but remain turned on, or they flash abnormally. Have your vehicle inspected by an Authorized Mazda Dealer.

• A personalized function is available to change the turn indicator sound volume.

  Refer to the Settings section in the Mazda Connect Owner's Manual.

Lane-Change Signals

Move the lever halfway toward the direction of the lane change―until the indicator flashes― and hold it there. It will return to the off position when released.

Three-Flash Turn Signal

After releasing the turn signal lever from the halfway point, the turn signal indicator flashes 3 times. The operation can be canceled by moving the lever in the direction opposite to which it was operated.

The three-flash turn signal function can be switched to on/off using the personalization function.

Refer to the Settings section in the Mazda Connect Owner's Manual.