Headlight switch
The headlights can be operated manually or automatically,
Turning on the headlights
Operating the switch turns on the lights as follows:
- The front position, tail, license plate and instrument panel lights turn on.
- The headlights and all the lights listed above turn on.
- The headlights, daytime running lights (P.188) and all the lights listed above turn on and off automatically.
AUTO mode can be used when
The engine switch is in IGNITION ON mode .
Daytime running light function
To make your vehicle more visible to other drivers during daytime driving, the daytime running lights turn on automatically whenever the engine is started and the parking brake is released with the headlight switch in the position. (Illuminate brighter than the front position lights.) Daytime running lights are not designed for use at night.
Headlight control sensor
The sensor may not function properly if an object is placed on the sensor, or anything that blocks the sensor is affixed to the windshield. Doing so interferes with the sensor detecting the level of ambient light and may cause the automatic headlight system to malfunction.
Automatic light off system
- When the light switch is in : The headlights turn off automatically if the engine switch is turned to ACCESSORY mode or turned off.
- When the light switch is in : The headlights and all the lights turn off automatically if the engine switch is turned to ACCESSORY mode or turned off.
To turn the lights on again, turn the engine switch to IGNITION ON mode , or turn the light switch to position once and then back.
Light reminder buzzer
A buzzer sounds when the engine switch is turned off or turned to ACCESSORY mode and the driver’s door is opened while the lights are turned on.
Automatic headlight leveling system
The level of the headlights is automatically adjusted according to the number of passengers and the loading condition of the vehicle to ensure that the headlights do not interfere with other road users.
12-volt battery-saving function
n order to prevent 12-volt the battery of the vehicle from discharging, if the light switch is in the or position when the engine switch is turned off the 12-volt battery saving function will operate and automatically turn off all the lights after approximately 20 minutes. When the engine switch is turned to IGNITION ON mode , the 12-volt battery-saving function will be disabled.
When any of the following are performed, the 12-volt battery-saving function is canceled once and then reactivated. All the lights will turn off automatically 20 minutes after the 12-volt battery- saving function has been reactivated:
- When the headlight switch is operated
- When a door is opened or closed
Welcome light illumination contro
The front position, tail lights and license plate lights automatically turn on at night when the doors are unlocked using the entry function or wireless remote control if the light switch is in the position.
Customization
Settings (e.g. light sensor sensitivity) can be changed.
NOTICE
To prevent 12-volt battery discharge Do not leave the lights on longer than necessary when the engine is not running .
Turning on the high beam headlights
- With the headlights on, push the lever away from you to turn on the high beams.
Pull the lever toward you to the center position to turn the high beams off. - Pull the lever toward you and release it to flash the high beams once.
You can flash the high beams with the headlights on or off.
Extended Headlight Lighting system
This system allows the headlights and front position lights to be turned on for 30 seconds when the engine switch is off.
Pull the lever toward you and release it with the light switch is in after turning the engine switch off. Pull the lever toward you and release it again to turn off the lights.
Cornering lights
When any of the following conditions is met, while the headlights (low beam) are on, the cornering lights will additionally turn on and light up the direction of movement for the vehicle. This is to ensure excellent visibility when either driving at intersections or parking at night.
- The steering wheel is operated
- The turn signal lever is operated
- The shift position is in R (both left and right side cornering lights)
Cornering light control
- OThe lights illuminate when the vehicle speed is approximately 30 km/h (19 mph) or less. However, the lights turn off when the vehicle speed increases to approximately 35 km/h (22 mph) or more.
- After the lights remain illuminated for 30 minutes, they automatically turn off.
Download Manual