Bulb Replacement
Replacement Bulbs, Names, And Part Numbers
In the instance a bulb needs to be replaced, this section includes bulb description and replacement part numbers.
NOTE:
See an authorized dealer for LED bulb replacement.
|
|
Interior Bulbs |
|
|
Bulb Name |
|
Bulb Number |
|
Automatic Transmission Indicator Lamp |
658 |
8 |
|
Heater Control Lamps |
194 |
|
|
Rocker Switch Indicator Lamp (Rear Window Defogger) |
** |
|
|
Soundbar Dome Lamp |
912 |
|
|
** Bulbs only available from an authorized dealer. |
|
|
Exterior Bulbs
Bulb Name Bulb Number
|
Headlamps H13 |
|
Premium Head Lamps LED – (Serviced at an authorized dealer) |
|
Sport Front Park/Turn Signal Lamps 7442NALL |
|
Premium Front Park/Turn Signal Lamps LED – (Serviced at an authorized dealer) |
|
Base (Overland/Rubicon) Turn Lamp 7440NA |
|
Base (Overland/Rubicon) Park DRL Lamp 7443 |
|
Front Side Marker Lamps LED – (Serviced at an authorized dealer) |
|
Base Fog Lamps PSX24W |
|
Premium Fog Lamps LED – (Serviced at an authorized dealer) |
|
Rear Premium LED Tail Lamps LED – (Serviced at an authorized dealer) |
|
Rear Base Tail Lamp Stop/Tail/Turn Bulb 3157 |
|
Rear Base Tail Lamp Backup Bulb 7440 |
|
Rear Base Tail Lamp Side Marker LED – (Serviced at an authorized dealer) |
|
Center High Mounted Stop Lamp LED – (Serviced at an authorized dealer) |
|
License Lamp LED – (Serviced at an authorized dealer) |
NOTE:
Numbers refer to commercial bulb types that can be purchased from an authorized dealer. If a bulb needs to be replaced, visit an authorized dealer or refer to the applicable Service Manual.
Bulb Replacement
NOTE:
Lens fogging can occur under certain atmospheric conditions. This will usually clear as atmospheric conditions occur to allow the condensation to change back into a vapor. Turning the lamps on will usually accelerate the clearing process.
HALOGEN HEADLAMPS
NOTE:
We advise referring to an authorized dealer for service.
See below steps to replace:
- Open hood and support using prop rod.
- Remove the front grille. Turn the retainers along the top a quarter turn counterclockwise and remove.
- Pull the bottom of the grille away, starting at one side and working toward the other.
- Remove the three screws holding the headlamp to the vehicle.
- Remove lamp from the vehicle.
- Remove the lamp from the collar.
- Grab the bulb and turn a quarter turn counter-clockwise.
- Pull the bulb from the housing.
- Push connector locking tab to the unlock position.
- Remove connector from bulb.
- Push connector onto new bulb base, and push the connector locking tab to the lock position.
- Reinstall bulb housing. Rotate the bulb a quarter turn clockwise.
CAUTION!
Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol