Bulb Replacement
REPLACEMENT BULBS
NOTE:
See an Authorized Dealer for LED bulb replacement.
|
|
Interior Bulbs |
|
Bulb Name |
Bulb Number |
|
Cargo Lamp |
TL212–2 |
|
Overhead Console Lamp |
PLW214–2A |
|
Reading Lamp |
WL212–2 |
|
|
Exterior Bulbs |
|
Bulb Name |
Bulb Number |
|
Low Beam/High Beam Headlamps |
LED (Serviced at an Authorized Dealer) |
|
Front Park/Daytime Running Lamps |
LED (Serviced at an Authorized Dealer) |
|
Front Turn Signal Lamps |
LED (Serviced at an Authorized Dealer) |
|
Front Fog Lamps |
LED (Serviced at an Authorized Dealer) |
|
Rear Tail/Stop Lamps |
LED (Serviced at an Authorized Dealer) |
Exterior Bulbs
Bulb Name
Rear Turn Signal Lamps
Center High Mounted Stop Lamp (CHMSL)
Back-Up Lamps
License Plate Lamp
Bulb Number
LED (Serviced at an Authorized Dealer)
LED (Serviced at an Authorized Dealer)
W21W
LED (Serviced at an Authorized Dealer)
REPLACING EXTERIOR BULBS
Back-up Lamp
See below steps to replace:
- Open the liftgate.
- Use a fiber stick or flat blade screw driver at the top of the bulb access cover to pry the lower trim panel from the liftgate.
- Once the access panel is loose, pull it back exposing the insulation.
- Move insulation towards center of vehicle to expose the back of liftgate lamp.
- Twist the socket counterclockwise and remove from lamp.
- Pull the bulb to remove it from the socket.
- Replace the bulb, reinstall the socket.
- Move insulation back to original position.
- Close the liftgate.
Twist the socket counterclockwise and remove from lamp.