Bulb Replacement
|
Interior Bulbs |
|
|
Bulb Name |
Bulb Number |
|
Cargo Lamp |
TL212–2 |
|
Overhead Console Lamp |
PLW214–2A |
|
Reading Lamp |
WL212–2 |
|
Exterior Bulbs |
|
|
Bulb Name |
Bulb Number |
|
Low Beam/High Beam Headlamps |
LED (Serviced at an authorized dealer) |
|
Front Park/Daytime Running Lamps |
LED (Serviced at an authorized dealer) |
|
Front Turn Signal Lamps |
LED (Serviced at an authorized dealer) |
|
Front Fog Lamps |
LED (Serviced at an authorized dealer) |
|
Rear Tail/Stop Lamps |
LED (Serviced at an authorized dealer) |
|
Rear Turn Signal Lamps |
LED (Serviced at an authorized dealer) |
|
Center High Mounted Stop Lamp (CHMSL) |
LED (Serviced at an authorized dealer) |
|
Back-Up Lamps |
W21W |
|
License Plate Lamp |
LED (Serviced at an authorized dealer) |
REPLACING EXTERIOR BULBS
BACK-UP LAMP
-
Open the liftgate.
-
Use a fiber stick or flat blade screw driver at the top of the bulb access cover to pry the lower trim panel from the liftgate.
-
Once the access panel is loose, pull it back exposing the insulation.
-
Move insulation towards center of vehicle to expose the back of liftgate lamp.
-
Twist the socket counterclockwise and remove from lamp.
-
Pull the bulb to remove it from the socket.
-
Replace the bulb, reinstall the socket.
-
Move insulation back to original position.
-
Close the liftgate.