Headlight Swith
Lighting
- Turn the switch to the position:
The front parking, side marker, tail and license plate lights will come on. Auto-light system will be set (Type B). - Turn the switch to the position:
Headlights will come on and all the other lights remain on.
Autolight system
Type A (if so equipped):
The autolight system allows the headlights to be set so they turn on and off automatically.
To set the autolight system:
- Make sure the headlight switch is in the AUTO position .
- Place the ignition switch in the ON position.
- The autolight system automatically turns the headlights on and off.
To turn the autolight system off, turn the switch to the OFF, or position.
The autolight system can turn on the head-lights automatically when it is dark and turn off the headlights when it is light.
The headlights will also be turned on auto-matically at twilight or in rainy weather (when the windshield wiper is operated continuously).
If the ignition switch is placed in the OFF position and one of the doors is opened and this condition is continued, the headlights remain on for 5 minutes.
Type B (if so equipped):
The autolight system allows the headlights to be set so they turn on and off auto-matically.
To set the autolight system:
- Make sure the headlight switch is in the AUTO or position.
- Place the ignition switch in the ON position.
- The autolight system automatically turns the headlights on and off.
To turn the autolight system off, turn the switch to the position.
The autolight system can turn on the head-lights automatically when it is dark and turn off the headlights when it is light.
The headlights will also be turned on auto-matically at twilight or in rainy weather (when the windshield wiper is operated continuously).
If the ignition switch is placed in the ON position when the parking brake is applied, the headlights remain off.
With the position selected, the head-lights turn off when the ignition switch is placed in the OFF position, the shift lever is in the P (Park) position, or the parking brake is applied. (The front parking, tail, license plate, and instrument lights are on.)
How to turn off all lights:
With the AUTO position selected, all lights turn off when the engine is restarted after the parking brake is applied.
NOTE:
When driving at night, the headlights remain on and cannot be turned off.
When the vehicle is stopped, the headlights can be turned off when the headlight switch is in the position.
With the AUTO position selected (headlights are on), the headlights will remain on for 5 minutes when the ignition switch is placed in the OFF position and one of the doors is opened.
Automatic headlights off delay:
You can keep the headlights on for up to 180 seconds after you push the ignition switch to OFF and open any door then close all the doors.
You can adjust the period of the automatic headlights off delay from 0 seconds (OFF) to 180 seconds. The factory default setting is 45 seconds.
For automatic headlights off delay setting, see the INFINITI InTouchTM Owner’s Man-ual.
Be sure not to put anything on top of the photo sensor 
located on the top of the instrument panel. The photo sensor controls the autolight; if it is covered, the photo sensor reacts as if it is dark and the head-lights will illuminate.
Example
Headlight beam select
- To select the low beam, put the lever in the neutral position as shown.
- To select the high beam, push the lever forward while the switch is in the position. Pull it back to select the low beam.
- Pulling the lever toward you will flash the headlight high beam even when the headlight switch is in the OFF position (if so equipped).
Download Manual