ControlsNear the Steering Wheel
Headlights
The rotating switch on the left lever controls the lights. Turning this switch to the position turns on the parking lights, taillights, instrument panel lights, side-marker lights, and rear license plate lights. Turning the switch to the position turns on the headlights.
If you leave the lights on with the ignition switch in ACCESSORY (I) or LOCK (0), you will hear a reminder chime when you open the driver's door.
To change between low beams and high beams, pull the turn signal lever until you hear a click, then let go. The blue high beam indicator will light.
To flash the high beams, pull the turn signal lever back lightly, then release it. The high beams will come on and go off.
The high beams will stay on for as long as you hold the lever back, no matter what position the headlight switch is in.
Daytime Running Lights (Canadian Models)
With the headlight switch off, the high beam headlights come on with reduced brightness when you turn the ignition switch to ON (II) and release the parking brake. They remain on until you turn the ignition off, even if you set the parking brake.
The headlights revert to normal operation when you turn them on with the switch.
Instrument Panel Brightness
The dial on the dashboard to the left of the instrument panel controls the brightness of the instrument panel lights. Turn the dial to adjust the brightness.
Turn Signals
Signal a turn or lane change with this lever. Push down on the lever to signal a left turn, and up to signal a right turn. If you push it up or down all the way, the turn signal continues to blink even when you release the lever. It shuts off automatically as you complete the turn.
To signal a lane change, push lightly on the turn signal lever in the proper direction and hold it. The lever will return to the center position as soon as you release it