Headlight Bulbs
When replacing, use the following bulbs.
High beam headlight: 60 W (HB3 for halogen bulb type)
Low beam headlight: LED type
High Beam Headlights
Driver side
- Remove the engine compartment cover.
- Remove the clips.
- Remove the air intake duct.
Both sides - Push the tab to remove the coupler.
- Rotate the old bulb counter-clockwise to remove.
- Insert a new bulb into the headlight assembly and turn it clockwise.
- Insert the coupler into the connector of the bulb.
* Not available on all models
NOTICE
Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.
The headlight aim is set by the factory, and does not need to be adjusted. However, if you regularly carry heavy items in the cargo area or tow a trailer, have the aiming readjusted at a dealer or by a qualified technician.
Low beam headlights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Models with LED high beam headlights
High beam headlights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Models with halogen high beam headlights
When replacing a halogen bulb, handle it by its base, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.
Remove the clip using a Phillips-head screwdriver.
Insert the clip with the center pin raised, and push until it is flat.
Download Manual