2021 Honda Passport Owners Manual - Driving Position Memory System

Driving Position Memory System

You can store two driver’s seat positions (except for power lumbar) and outside mirror positions with the driving position memory system.
When you unlock and open the driver’s door with a remote transmitter or keyless access system, door mirrors adjust to one of the two preset positions and the seat adjusts to the retracted position of one of the two preset positions automatically

The seat will move to the stored position when you set the power mode to ACCESSORY.

When you enter the vehicle, the driver information interface briefly shows you which remote transmitter you used to unlock the vehicle.

• DRIVER 1 transmitter is linked to memory button 1.
• DRIVER 2 transmitter is linked to memory button 2.

The driver’s seat moves rearward depending on the set seating position once you

• Stop the vehicle.
• Put the transmission in (P).
• Turn the engine off.
• Open the driver’s door.

Once the power mode is in the ACCESSORY position, the driver’s seat moves to the DRIVER 1 or 2 preset position.

Using the audio/information screen, you can disable the automatic seat and door mirrors adjustment function.

The driver’s seat easy exit feature can be turned ON/ OFF.

System Operation
The system will not operate if:

• The vehicle speed is above 2 mph (3 km/h).
• Either memory button is pressed while the seat is in motion.
• The seat position is adjusted while in operation.
• The memory 1 or 2 position is set fully to the rear.

The system may not recognize a key if:

• The key is in close proximity to a cell phone or other wireless device.
• Both keys are in the vehicle at the same time.
• The driving position memory system is disabled in customized features.
• Opening driver's door without fully grabbing door handle.

 Storing a Position in Memory

1. Set the power mode to ON. Adjust the driver’s seat and the door mirrors to the desired position.
2. Press the SET button
   You will hear the beep, and the memory button indicator light will blink.
3. Press and hold memory button (1) or (2) within five seconds of pressing the SET button.
   You will hear two beeps, and the indicator light on the button you pressed stays on once the seat and the outside mirror positions have been memorized.

After you press the SET button, the storing operation will be canceled when:

• You do not press the memory button within five seconds.
• You readjust the seat and door mirrors position before the double-beep.
• You set the power mode to any position except ON.

Recalling the Stored Position

1. Put the transmission into (P).
2. Apply the parking brake.
3. Press a memory button ((1) or (2)).
   You will hear the beeper, and the indicator light will blink.

The seat and the door mirrors will automatically move to the memorized position. When it has finished moving, you will hear the beep, and the indicator light stays on.

The seat and the door mirrors will stop moving if you:

• Press the SET button or memory button (1) or (2).
• Adjust the seat position or door mirrors.
• Put the transmission into a position other than (P).