2021 Honda Odyssey Owners Manual - Driving Position Memory System

Driving Position Memory System

You can store two driver’s seat positions (except for power lumbar) and outside mirror positions with the driving position memory system.
When you unlock and open the driver’s door with a remote, the seat and outside mirrors adjust automatically to one of the two preset positions.

When you unlock and open the driver’s door with a remote, the seat and outside mirrors adjust automatically to one of the two preset positions.

• DRIVER 1 transmitter is linked to memory button 1.
• DRIVER 2 transmitter is linked to memory button 2.

The driver’s seat moves rearward depending on the set seating position once you

• Stop the vehicle.
• Put the transmission in (P).
• Set the power mode to VEHICLE OFF.
• Open the driver’s door.

Once the power mode is in the ACCESSORY position, the driver’s seat moves to the DRIVER 1 or 2 preset position.

Using the audio/information screen, you can disable the automatic seat and door mirrors adjustment function.

The driver’s seat easy exit feature:

• Will move rearward to allow you to more easily exit the vehicle.
• Can be turned on or off.

System Operation
The system will not operate if:

• The vehicle speed is above 2 mph (3 km/h).
• Either memory button is pressed while the seat is in motion.
• The seat position is adjusted while in operation.
• The memory 1 or 2 position is set fully to the rear.

 Storing a Position in Memory

1. Set the power mode to ON. Adjust the driver’s seat and the door mirrors to the desired position.
2. Press the SET button
   You will hear the beep, and the memory button indicator light will blink.
3. Press and hold memory button (1 or (2 within five seconds of pressing the SET button.
   Once the seat and the outside mirrors position has been memorized, the indicator light on the button you pressed stays on.

After you press the SET button, the storing operation will be canceled when:

• You do not press the memory button within five seconds.
• You readjust the seat and door mirrors position before the double-beep.
• You set the power mode to any position except ON.

Recalling the Stored Position

1. Put the transmission into (P).
2. Apply the parking brake.
3. Press a memory button ((1 or (2).
   You will hear the beeper, and the indicator light will blink.

The seat and the door mirrors will automatically move to the memorized position. When it has finished moving, you will hear the beep, and the indicator light stays on.

The seat and the door mirrors will stop moving if you:

• Press the SET button or memory button (1) or (2).
• Adjust the seat position or door mirrors.
• Put the transmission into a position other than (P).