Disclaimer: Not affiliated with or endorsed by Honda Motor Company. For informational purposes only. Full Disclaimer

2020 Honda Insight Owners Manual - Replacing Light Bulbs



Replacing Light Bulbs

Headlights


Headlights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.

The headlight aim is set by the factory, and does not need to be adjusted. However, if you regularly carry heavy items in the trunk, have the aiming readjusted at a dealer or by a qualified technician.

Fog Lights*


Fog lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.

Front Turn Signal, Parking/Daytime Running and Front Side Marker Lights


Front turn signal, parking/daytime running and front side marker lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.

Side Turn Signal/Emergency Indicator Lights*


Door mirror side turn lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.

* Not available on all models

Rear Turn Signal Light Bulbs


When replacing, use the following bulbs.

Rear Turn Signal Light: 21 W (Amber)

  1. Use a Phillips-head screwdriver or socket to remove the bolts.
  2. Pull the light assembly out of the rear pillar.
  3. Turn the socket counterclockwise and remove it.
  4. Remove the old bulb and insert a new bulb.
  5. Slide the light assembly onto the guide on the body.
  6. Align the pins with the body grommets, then push in until they fully seat.

Brake and Rear Side Marker Lights


Brake and rear side marker Lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.

Taillights


Taillights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.

Back-Up Light Bulbs


When replacing, use the following bulbs.

Back-Up Light: 16 W

  1. Remove the holding clips using a flat-tip screwdriver, then pull the lining back.
  2. Turn the socket counterclockwise and remove it.
  3. Remove the old bulb and insert a new bulb.

When removing the clip, insert a flat-tip screwdriver, then lift and remove the clip.

Insert the clip with the pin raised, and push until it is flat.

Rear License Plate Light


Rear license plate light is LED type. Have an authorized Honda dealer inspect and replace the light assembly.

High-Mount Brake Light


High-mount brake light is LED type. Have an authorized Honda dealer inspect and replace the light assembly.