Turn Signals and Headlights
- Turn signal
- Off
- Parking and instrument panel lights
- Headlights on
- High beams
- Flash high beams
Turn Signal － Push down on the lever to signal a left turn and up to signal a right turn. To signal a lane change, push lightly on the lever, and hold it. The lever will return to center when you release it or complete a turn.
Headlights － Turning the switch to the ‘‘ ’’ position turns on the parking lights, taillights, instrument panel lights, side-marker lights, and rear license plate lights.
Turning the switch to the ‘‘ ’’ position turns on the headlights.
When the light switch is in the ‘‘ ’’ or ‘‘ ’’ position, the lights on indicator comes on as a reminder.
This indicator stays on if you leave the light switch on and turn the ignition switch to the ACCESSORY (I) or the LOCK (0) position.
If you leave the lights on with the key removed from the ignition switch, you will hear a reminder chime when you open the driver's door.
High Beams － Push the lever back until you hear a click to turn on the high beams. The blue high beam indicator will come on. Pull the lever back again to low beams.
To flash the high beams, pull the lever back lightly, then release it. The high beams will stay on as long as you hold the lever back.
Daytime Running Lights
With the headlight switch off, the daytime running lights come on when you turn the ignition switch to the ON (II) position and release the parking brake. They remain on until you turn the ignition switch off, even if you set the parking brake.
When the headlights are on, the daytime running lights are off.
Instrument Panel Brightness
The select/reset knob on the instrument panel controls the brightness of the instrument panel lights. Turn the knob to adjust the brightness.
Separate adjustments can be made when the headlights are on and off.
Download Manual