Brightness Control
With the parking lights are turned on and the ignition switch is in ON (w*1, you can use the brightness control knob to adjust instrument panel brightness.
Brighten: Turn the knob to the right.
Dim: Turn the knob to the left.
You will hear a beeper when the brightness reaches minimum or maximum. Several seconds after adjusting the brightness, you will be returned to the previous screen.
Instrument panel brightness differs between when the exterior lights are on and when they are off. The instrument panel dims to reduce glare when the lights are on.
Models with headlight integration with wipers
When it is bright outside and the headlight integration with the wiper is activated, the instrument panel brightness does not change.
Turn the knob to the right until the brightness display is up to max. This cancels the reduced instrument panel brightness when the exterior lights are on.
The brightness can be set differently for when the exterior lights are on, and when they are off.
To cancel the reduced instrument panel brightness when the exterior lights are on, turn the knob to the right until the brightness display is up to max, the beeper sounds.
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
■ Brightness level indicator
The brightness level is shown on the driver information interface while you are adjusting it.
Download Manual