Taillight and Back-Up Light Bulbs
When replacing, use the following bulbs.
|
Taillight:LED Back-Up Light:16 W |
- Remove the holding clip using a flat-tip screwdriver, then pull the lining back.
- Turn the socket counter-clockwise and remove it.
- Remove the old bulb and insert a new bulb.
Taillights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
When removing the clip, insert a flat-tip screwdriver, then lift and remove the clip.
Insert the clip with the pin raised, and push until it is flat.
Rear License Plate Light
Rear license plate light is LED type. Have an authorized Honda dealer inspect and replace the light assembly.
High-Mount Brake Light Bulb
Models without LED high-mount brake light
When replacing, use the following bulb.
|
High-Mount Brake Light:21 W |
- Open the trunk.
- Turn the socket counter-clockwise and remove it.
- Remove the old bulb and insert a new bulb.
Models with LED high-mount brake light
High-mount brake light is LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Download Manual