Headlight Bulbs
When replacing, use the following bulbs.
High beam headlight: 60 W (HB3 for halogen bulb type) *
High beam headlight: LED type*
Low beam headlight: 55 W (H11 for halogen bulb type) *
Low beam headlight: LED type*
■ High Beam Headlights
- Push the tab to remove the coupler.
- Rotate the old bulb counter-clockwise to remove.
- Insert a new bulb into the headlight assembly and turn it clockwise.
- Insert the coupler into the connector of the bulb.
NOTICE
Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.
All models
The headlight aim is set by the factory, and does not need to be adjusted. However, if you regularly carry heavy items in the trunk, have the aiming readjusted at a dealer or by a qualified technician.
Models with halogen headlights
When replacing a halogen bulb, handle it by its base, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.
Models with LED headlights
Headlights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
■ Low Beam Headlights
- Push the tab to remove the coupler.
- Rotate the old bulb counter-clockwise to remove.
- Insert a new bulb into the headlight assembly and turn it clockwise.
- Insert the coupler into the connector of the bulb.
Fog Light Bulbs*
When replacing, use the following bulbs.
Fog Light: 35 W (H8 for halogen bulb type)*
Fog Light: LED type
1. Remove the clips using a flat-tip screwdriver, remove the bolt, and push up the under cover.
2. Push the tab to remove the coupler.
3. Rotate the old bulb counter-clockwise to remove.
4. Insert a new bulb into the fog light assembly and turn it clockwise.
5. Insert the coupler into the connector of the bulb.
NOTICE
Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.
When replacing a halogen bulb, handle it by its plastic case, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.
Models with LED fog lights
Fog lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Front Turn Signal Light Bulbs
When replacing, use the following bulbs
Front Turn Signal Light: 21 W (Amber)
1. Turn the socket counter-clockwise and remove it.
2. Remove the old bulb and insert a new bulb.
Front Turn Signal Lights
Front turn signal lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Front Side Marker Light Bulbs
When replacing, use the following bulbs.
Front Side Marker Light: 3 W
1. Push the tab to remove the light assembly.
2. Push the tab to remove the coupler.
Driver side
3. Turn the socket counter-clockwise to remove it, then remove the old bulb.
4. Insert a new bulb.
Passenger side
3. Turn the socket clockwise to remove it, then remove the old bulb.
4. Insert a new bulb.
Parking/Daytime Running Lights
Parking/daytime running lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Side Turn Signal/Emergency Indicator Lights*
Door mirror side turn lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Brake Light, Tail/Rear Side Marker Light, Rear Turn Signal Light and Back-Up Light Bulbs
When replacing, use the following bulbs.
Brake Light: 21 W
Tail/Rear Side Marker Light: LED
Rear Turn Signal Light: 21 W (Amber)
Back-Up Light: 16 W
1. Use a Phillip-head screwdriver or socket to remove the bolts.
2. Pull the light assembly out of the rear pillar.
3. Turn the socket counter-clockwise and remove it.
4. Remove the old bulb and insert a new bulb.
5. Slide the light assembly onto the guide on the body.
6. Align the pins with the body grommets, then push in until they fully seat.
Tail/rear side marker lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Taillights
Taillights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Rear License Plate Light
Rear license plate light is LED type. Have an authorized Honda dealer inspect and replace the light assembly.
High-Mount Brake Light Bulb
High-mount brake light is LED type. Have an authorized Honda dealer inspect and replace the light assembly.