2021 Honda Accord Hybrid Owners Manual - Taillight, Brake Light* and Back-Up Light Bulbs

Taillight, Brake Light* and Back-Up Light Bulbs

When replacing, use the following bulbs.

Driver side

1. Remove the holding clips using a flat-tip screwdriver, then pull the lining back.
2. Turn the socket counter-clockwise and remove it.
3. Remove the old bulb and insert a new bulb.

Passenger side

2. Turn the socket clockwise and remove it.
3. Remove the old bulb and insert a new bulb.

Taillights and brake lights* are LED type. Have an authorized Honda dealer inspect and replace the light assembly.

When removing the clip, insert a flat-tip screwdriver, then lift and remove the clip.

Insert the clip with the pin raised, and push until it is flat.

Rear License Plate Light

Rear license plate light is LED type. Have an authorized Honda dealer inspect and replace the light assembly.

High-Mount Brake Light

High-mount brake light is LED type. Have an authorized Honda dealer inspect and replace the light assembly.