Additional Storage Features
Cargo Tie-Downs
Two cargo tie-downs are located in the rear compartment of the vehicle. The tie-downs can be used to secure small loads.
Cargo Management System
Tray Option
Lift the load floor to access the cargo management system.
The cargo management system is used to organize storage in the cargo area.
Cargo Management System Tray Removal
To access the spare tire or the tire sealant and compressor kit, the cargo management system tray must be removed.
1. Turn the right side wing nut to remove.
2. Remove the strap.
Make sure the strap is secure after service or reinstalling the cargo management system.
3. Turn the left side wing nut to remove.
4. Remove the small storage bin.
5. Unsnap the hinges on the load floor from the cargo management system.
6. Pull up to remove the load floor.
7. Lift up on both sides to remove the cargo management system to access the spare tire.
All Terrain
The rear trays do not need to be removed to access the spare tire.
Rail and Divider Option
Cargo Management System Unlock
Cargo Management System Installation
1. Turn both knobs to the unlock position.
2. Slide the divider along the rail to the desired position until it clicks into place.
3. Make sure the divider is locked into place in the rail grooves.
Cargo Management System Lock
4. Turn both knobs to the lock position.
Cargo Management System Removal
1. Turn both knobs to the unlock position. 2. Press the buttons and pull up to remove
the divider. 3. Store the divider outside of the vehicle.
Download Manual