Disclaimer: Not affiliated with or endorsed by Ford Motor Company. For informational purposes only. Full Disclaimer
You Might Also Need These Items
- Eliminate vibration, excessive bearing wear, and possible structural failure of lugs caused by Non Hub Centric Wheels.
- Hub Ring Internal Diameter (ID) (Match to Vehicle Hub Diameter) : 70.50mm
- Hub Ring Outer Diameter (OD) (Match to Wheel Center Bore Diameter) : 83.00mm
Check price on
- Eliminate vibration, excessive bearing wear, and possible structural failure of lugs caused by Non Hub Centric Wheels.
- Hub Ring Internal Diameter (ID) (Match to Vehicle Hub Diameter) : 70.50mm
- Hub Ring Outer Diameter (OD) (Match to Wheel Center Bore Diameter) : 73.00mm
Check price on
- Fitment: Fits Ford Mustang, Ranger, Explorer, Crown Vic, GT, Bronco, Edge, Lincoln Continental, Mark, MKX, Mazda with 5x4.5" Bolt Pattern / Bolt Circle. 70.5mm Hub Centric to vehicle hub and 70.5mm wh...
- Widen your vehicle base and give your vehicle a more aggressive stance while improving handling and stability. Increase tire clearance, fix brake caliper clearance issues, allow installation of lift/l...
- Kit Includes 2 Anodized, Precision machined 6061-T6 Aircraft Grade Aluminum adapters with heat treated, hardened Grade 10.9-wheel studs and matching black, dual coated lugs. Anodized surface provides...
Check price on
- NOT HUB CENTRIC. These spacers will not center to the Vehicle Hub or Wheel Hub. EXPECT SOME PLAY in the spacer fitment when put over the studs/bolts.
- Universal Fit: 5 x 108mm (5 x 4.25), 5 x 110mm, 5 x 112mm, 5 x 114.30mm (5 x 4.50), 5 x 115mm, 5 x 120.65mm (5 x 4.75), 5 x 120mm, 5 x 127mm (5 x 5.00), 5 x 130mm, 5 x 135mm
- Spec: OD: 164mm (6.46") | ID: 90mm (3.58") | Thickness: 8mm (5/16") | Quantity: 2
Check price on
- Eliminate vibration, excessive bearing wear, and possible structural failure of lugs caused by Non Hub Centric Wheels.
- Hub Ring Internal Diameter (ID) (Match to Vehicle Hub Diameter) : 70.50mm
- Hub Ring Outer Diameter (OD) (Match to Wheel Center Bore Diameter) : 72.56mm
Check price on
- Precision machined 6061-T6 Aircraft Grade Aluminum spacers / adapters with heat treated, hardened Grade 12.9-wheel studs and matching black, dual coated lugs. Anodized surface provides corrosion resis...
- Anodized surface provides corrosion resistance.
- Widen your vehicle base and give your vehicle a more aggressive stance while improving handling and stability. Increase tire clearance, fix brake caliper clearance issues, allow installation of lift/l...
Check price on
If after replacing the rims you began to notice a strange knocking or rattling noise coming from the suspension, the reason may be that the new rims are not seated tightly enough on the hub. To eliminate this problem, install a hub-centric ring - this will remove excess space and make the rim fit snugly in place, thus eliminating noise and vibration.