Turn and Lane-Change Signals
An arrow on the instrument cluster flashes in the direction of the turn or lane change.
Move the turn signal lever all the way up or down to signal a turn.
Partially raise or lower the lever for less than one second until the arrow starts to flash to signal a lane change. This causes the turn signals to automatically flash three times. It will flash six times if Tow/Haul Mode is active. Holding the turn signal lever for more than one second will cause the turn signals to flash until the lever is released.
The lever returns to its starting position whenever it is released.
If after signaling a turn or a lane change the arrows flash rapidly or do not come on, a signal bulb could be burned out. If equipped with LED turn signals, see your dealer.
Replace any burned out bulbs. If a bulb is not burned out, check the fuse.
Turn Signal On Chime
If the turn signal is left on for more than 1.2 km (0.75 mi), a chime sounds at each flash of the turn signal. A message may appear in the Driver Information Center (DIC). To turn the chime and message off, move the turn signal lever to the off position.
Download Manual