Roof
Sunroof
If equipped, the ignition must be on or in accessory mode, or Retained Accessory Power (RAP) must be active to operate the sunroof.
1. Sunroof Switch
2. Sunshade Switch
Sunroof Express Operation
Press and release D (1) to vent. Press and release again to express-open. Press D (1) at any time to stop movement. Press and release g (1) to express-close. Press g (1) at any time to stop movement.
Sunroof Manual Operation
The sunroof can change to manual mode by holding D (1) while opening. The sunroof will now open as long as D (1) is held. Press and release again to change back to express operation.
Power Sunshade Express Operation
Press and release C (2) to express-open the power sunshade. Press C (2) at any time to stop movement. Press and releaseQ(2) to express-close the power sunshade. Press Q(2) at any time to stop movement.
Power Sunshade Manual Operation
The power sunshade can change to manual mode by holding C (2) while opening. The power sunshade will now open as long as C (2) is held. Press and release again to change back to express operation. The sunroof cannot be opened or closed if the vehicle has an electrical failure.
Automatic Reversal System
The sunroof has an automatic reversal system that is only active when the sunroof is operated in express-close mode.
If an object is in the path while express closing, the reversal system will detect an object, stop, and open the sunroof or power shade slightly.
If frost or other conditions prevent closing, override the feature by closing the sunroof in manual mode. To stop movement, release the switch.
Dirt and debris may collect on the sunroof seal or in the track. This could cause an issue with sunroof operation or noise. It could also plug the water drainage system.
Periodically open the sunroof and remove any obstacles or loose debris. Wipe the sunroof seal and roof sealing area using a clean cloth, mild soap, and water. Do not remove grease from the sunroof.
Download Manual