Lighting Features
Entry Lighting
The interior lamps turn on when pressing on the Remote Keyless Entry (RKE) transmitter or opening any doors, and the dome lamp control is in the DOOR position.
Some exterior lamps also turn on when pressing on the RKE transmitter or opening any doors. Low-Beam lamps will only turn on briefly at night, or in areas with limited lighting.
All lamps will gradually fade out after about 30 seconds.
Entry lighting can be disabled manually by closing all doors, pressing on the RKE transmitter, or starting the vehicle.
Exit Lighting
Some exterior lamps come on at night, or in areas with limited lighting, when the driver door is opened after the ignition is turned off. The dome lamp comes on when any door is opened or after the ignition is turned off. The exterior lamps and dome lamp remain on after the door is closed for a set amount of time, then automatically turn off.
The exterior lamps turn off immediately by turning the exterior lamp control off. This feature can be changed. See “Exit Lighting” under Vehicle Personalization 0 130.
Battery Power Protection
The battery saver feature is designed to protect the vehicle's battery.
If some interior lamps are left on and the ignition is turned off, the battery rundown protection system automatically turns the lamp off after some time.
Exterior Lighting Battery Saver
The exterior lamps turn off about 10 minutes after the ignition is turned off, if the parking lamps or headlamps have been manually left on. This protects against draining the battery. To restart the 10-minute timer, turn the exterior lamp control to the off position and then back to the parking lamp or headlamp position.
To keep the lamps on for more than 10 minutes, the ignition must be on or in ACC/ACCESSORY.
Download Manual