Disclaimer: Not affiliated with or endorsed by BMW Motor Company. For informational purposes only. Full Disclaimer

Recommended 2015 BMW X1 Engine Oil Capacity & Type

BMW / N20 / N20B / N20B20
Displacement - 2.0L I-4
Power - 154 hp
Torque - 177 lb/ft
Oil Capacity - 5.8 quarts
Oil Viscosity - 0W-20
Oil Drain Plug Torque - 18 lb/ft
Coolant Capacity - 9.1 quarts
BMW / N55 / N55B / N55B30
Displacement - 3.0L I-6
Power - 315 hp
Torque - 332 lb/ft
Oil Capacity - 6.9 quarts
Oil Viscosity - 0W-30
Oil Drain Plug Torque - 18 lb/ft
Coolant Capacity - 9.8 quarts

Motor Oil - See more

- Rapid oil delivery at low temperatures, high lubrication reliability at high and low temperatures

- Long engine service life due to high level of protection against wear, mixable and compatible with commercially-available engine oils

- Outstanding engine cleanliness, tested with catalytic converters and performance proved with turbochargers

Check price on

- The Ram-Pro Engine Spark Tester Probe is a must have diagnostic tool for any engine with a spark plug, & can quickly and easily diagnose ignition/engine outboard motor issues or a fault in the fuel de...

- HOW TO USE: Simply connect the tester between the spark plug and the plug wire, if spark is being sent, the tester will mirror the spark and light up - Find dirty spark plugs, defective points, bad ca...

- DIMENSIONS: 6" boot/cable, 5" shaft/light housing; 2.2 oz. DESIGN: Nickel Plated Shaft, Double ended flexible tool offers a straight boot -– Internal bulb lasts for years, but is replaceable through t...

Check price on

- For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual.

Check price on

Oil filters - See more

- Optimum protection for the engine

- Consistently high separation efficiency

- High dirt holding capacity of filter elements through high filter surface area

Check price on

- Vehicle Applications: 2006-2020 Bmw 128I, 135I, 228I, 320I, 323I, 325I, 328I, 330I, 335I, 428I, 435I, 525I, 528I, 530I, 535I, 640I, 740I, M2, M235I, M3, M4, X1, X3, X4, X5, X6, And Z4 Models (2.0L, 2....

- Filter Cross References: Bmw 11-42-7-953-129; Fram (Ch10075, Tg10075, Xg10075); K&N Hp-7014; Mann-Hummel (Hu8011Z, Hu816X); Premium Guard Pg5607; Purolator (Pl15607, Pbl15607); Wix 57327

- Construction: The Castrol Oil Filter Comes With Synthetic Media And All Necessary Replacement O-Rings To Meet Your Performance Filter Needs When Paired With Either Conventional, Semi-Synthetic, Or Syn...

Check price on

- PREMIUM PROTECTION–Synthetic blend resin media is engineered to deliver up to 10,000 miles of filter lifewith synthetic oil, as well as conventional oil.

- ULTRA EFFICIENT FILTER MEDIA – EX Series captures particles as small as 25 microns and offers 99% multi-pass efficiency over the life of the filter.

- STOP & GO PROTECTION - Silicone anti-drain back valve with high retention power to help protect the engine from oil starvation during start-ups.

Check price on

- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine

- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils

- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants

Check price on

Changing oil is an important maintenance task for any BMW X1 vehicle. Oil lubricates and cools the engine, increasing performance and extending its life. The 2015 BMW X1 oil capacity depends on the specific engine.

However, finding the right oil capacity is only one step of the process. Also pay attention to the recommended oil viscosity and type for your 2015 BMW X1 as well as the torque required for the oil drain plug.

Browse the charts to determine how much oil your 2015 BMW X1 takes and check other oil related specifications.