Changing bulb for front fog lights
Preparations
Trim cover for fog light
Screws securing fog light
The description for changing the bulb refers to the left fog light; in principle the same procedure applies to the right fog light.
– Switch off the ignition and the lights.
– Detach the trim cover (pull it carefully in the direction of the arrow).
– Remove the two securing screws and pull the fog light unit out of the bumper.
– Unplug the electrical connector.
Caution
The trim cover is secured to the bumper by several retaining hooks.
Do not use force when removing the trim cover to avoid damaging it.
Changing bulb
Front fog light: Bulb holder is highlighted
– Turn the bulb holder anti-clockwise and take it out of the fog light housing.
– Insert the new bulb holder and turn it clockwise as far as the stop.
After changing the bulb re-install all parts in the reverse sequence and check that the bulb is working.
Download Manual