2022 Acura RDX Owners Manual - Driving Position Memory System

Driving Position Memory System

You can store two driver’s seat and door mirror positions with the driving position memory system.
When you unlock and open the driver’s door with a keyless remote or keyless access system, door mirrors adjust to one of the two preset positions and the seat adjusts to retracted positions of one of the two preset positions automatically.

The seat will move to the stored position when you set the power mode to ACCESSORY.

• DRIVER 1 transmitter is linked to memory button 1.
• DRIVER 2 transmitter is linked to memory button 2.

 The driver’s seat moves rearward depending on the set seating position once you

• Stop the vehicle.
• Put the transmission in .
• Turn the engine off.
• Open the driver’s door.

 Once the power mode is in the ACCESSORY position, the driver’s seat moves forward to the DRIVER 1 or 2 preset position.

Using the audio/information screen, you can disable the automatic seat adjustment function.

The driver’s seat easy exit feature can be turned ON/ OFF

System Operation
The system will not operate if:

• Either memory button is pressed while the seat or mirrors are in motion.
• The seat or mirrors positions are adjusted while in operation.
• Either of the memorized positions is set fully to the rear.

 Models with mode selector

• The mode selector is pressed up or down while in operation.

 The system may not recognize a key if:

• The key is in close proximity to a cell phone or other wireless device.
• Both keys are in the vehicle at the same time.
• The Driving Position Memory System is disabled in customized features.
• Opening driver’s door without fully grabbing door handle.

 ■ Storing a Position in Memory

1. Set the power mode to ON. Adjust the driver’s seat and the door mirrors to the desired position.
2. Press the SET button.
   The memory button indicator light will blink.
3. Press and hold memory button or within five seconds of pressing the SET button.

• Once the seat and the door mirror positions have been memorized, the indicator light on the button you pressed stays on and you will hear the doublebeep.

 After you press the SET button, the storing operation will be canceled when:

• You do not press the memory button within five seconds.
• You readjust the seat or the door mirror position before the double-beep.
• You set the power mode to any position except ON.

 Models with mode selector

• You press the mode selector up or down.

 The seat and the door mirrors will stop moving if you:

• Press the SET button or memory button or .
• Adjust the seat position or door mirrors.
• Put the transmission into a position other than

 Models with mode selector

• •Press the mode selector up or down.