2019 Acura MDX Owners Manual - Driving Position Memory System

Driving Position Memory System

You can store two driver’s seat (except for power lumbar), steering wheel and door mirror positions with the driving position memory system. When you unlock and open the driver’s door with a remote transmitter, or keyless access system, door mirrors adjust to one of the two preset positions and the seat adjusts to retracted positions of one of the two preset positions automatically

The steering wheel and the seat will move to the stored position when you set the power mode to ACCESSORY.

When you enter the vehicle, the MID briefly shows you which remote transmitter you used to unlock the vehicle.

• DRIVER 1 transmitter is linked to memory button 1.
• DRIVER 2 transmitter is linked to memory button 2.

 The driver’s seat moves rearward and steering wheel fully up depending on the set seating position once you

• Stop the vehicle.
• Put the transmission in .
• Turn the engine off.
• Then open the driver’s door.

 Once the power mode is in the ACCESSORY position, the driver’s seat and steering wheel moves to the DRIVER 1 or 2 preset position.

Using the information screen or MID, you can disable the automatic seat, steering wheel and door mirrors adjustment function.

The driver’s seat easy exit feature can be turned ON/ OFF.

System Operation
The system will not operate if:

• The vehicle speed is above 3 mph (5 km/h).
• Either memory position button is pressed while the seat or steering wheel is in motion.
• The seat or steering wheel position is adjusted while in operation.
• The memory 1 or 2 position is set fully to the rear.

 ■ Storing a Position in Memory

1. Set the power mode to ON. Adjust the driver’s seat, the steering wheel and the door mirrors to the desired position.
2. Press the SET button.
   You will hear the beeper, and the memory button indicator light will blink.
3. 3. Press and hold memory button or within five seconds of pressing the SET button.
   Once the seat, the steering wheel and the outside mirror positions have been memorized, the indicator light on the button you pressed stays on and you will hear the double-beep.

 After you press the SET button, the storing operation will be canceled when:

• You do not press the memory button within five seconds.
• You readjust the seat, the steering wheel or the outside mirror position before the double-beep.
• You set the power mode to any position except ON.

 ■ Recalling the Stored Position

1. . Put the transmission into .
2. Apply the parking brake.
3. Press a memory button ( or ).
   You will hear the beeper, and the indicator light will blink.

 The seat, the steering wheel and the door mirrors will automatically move to the memorized positions. When it has finished moving, you will hear the beeper, and the indicator light stays on.

The seat, the steering wheel and the door mirrors will stop moving if you:

• Press the SET button or memory button or .
• Adjust the seat position, door mirrors, or steering wheel.
• Put the transmission into a position other than .