Replacing Light Bulbs
Headlights
Headlights are LED type. Have an authorized Acura dealer inspect and replace the light assembly.
Front Turn Signal, Parking/Daytime Running and Front Side Marker Lights
Front turn signal, parking/daytime running and front side marker lights are LED type. Have an authorized Acura dealer inspect and replace the light assembly.
Fog Lights*
Fog lights are LED type. Have an authorized Acura dealer inspect and replace the light assembly.
Taillights, Brake and Rear Side Marker Lights
Taillights, brake and rear side marker lights are LED type. Have an authorized Acura dealer inspect and replace the light assembly.
Rear Turn Signal Light Bulbs
When replacing, use the following bulbs.
Rear Turn Signal Light: 21 W (Amber)
1. Pry on the edge of the cover using a flat-tip screwdriver to remove the cover.
Wrap the flat-tip screwdriver with a cloth to prevent scratches.
2. Remove the mounting bolts.
3. Pull the light assembly out of the rear pillar.
4. Turn the socket counter-clockwise and remove it. Remove the old bulb.
5. Insert a new bulb.
Back-Up Light Bulbs
When replacing, use the following bulbs.
Back-Up Light: 16 W
1. Remove the holding clips using a flat-tip screwdriver, then pull the lining back.
2. Turn the socket counter-clockwise and remove it.
3. Remove the old bulb and insert a new bulb.
Rear License Plate Light Bulb
When replacing, use the following bulbs.
Rear License Plate Light: 5 W
1. Remove the lens by prying on the edge of the lens using a flat-tip screwdriver.
Wrap the flat-tip screwdriver with a cloth to prevent scratches.
2. Remove the old bulb and insert a new bulb.
High-Mount Brake Light
High-mount brake light is LED type. Have an authorized Acura dealer inspect and replace the light assembly.