The Ultimate Guide to the 2019 Ford Escape Coolant Type

By Nick Marchenko, PhD

For any vehicle enthusiast or owner, understanding the specifics of your vehicle's needs is crucial. The 2019 Ford Escape, with its 2.0L EcoBoost engine, stands out in terms of efficiency and performance. One key aspect of maintaining this efficiency is understanding the right type of coolant to use.

Coolant Specifications

According to the service guide, the 2019 Ford Escape requires a specific type of engine coolant. For the U.S. and Mexico, the recommended coolant is the Motorcraft® Orange Prediluted Antifreeze/Coolant (VC-3DIL-B, WSS-M97B44-D2). In Canada, the same Motorcraft® Orange Prediluted Antifreeze/Coolant is used but under a different specification (CVC-3DIL-B, WSS-M97B44-D2).

Importance of Using the Right Coolant

Using the correct coolant is not just a matter of following guidelines; it's about ensuring your car's longevity and efficiency. The right coolant helps in:

• Preventing Overheating: The coolant helps maintain the engine's temperature, preventing it from overheating.
• Corrosion Resistance: It provides protection against corrosion and buildup inside the engine's cooling system.
• Efficient Heat Transfer: Proper coolant ensures efficient heat transfer and maintains optimal engine performance.

Capacities and Other Fluids

Engine Coolant Capacity

The 2019 Ford Escape with a 2.0L EcoBoost engine holds 8.5 qt (8 L) of engine coolant. It's important to maintain this level to ensure the engine operates correctly.

Other Key Fluid Capacities

• Engine Oil: 5.7 qt (5.4 L) with oil filter.
• Brake Fluid: Between MIN/MAX on brake fluid reservoir.
• Rear Differential Fluid (All Wheel Drive): 2.4 pt (1.15 L).
• Power Transfer Unit (PTU) Fluid (All Wheel Drive): 11.8 fl oz (0.35 L).
• Automatic Transmission Fluid: 9.0 qt (8.5 L)1.
• Windshield Washer Fluid: Fill as required.
• Fuel Tank: Varies between Front Wheel Drive (16.5 gal or 62.5 L) and All Wheel Drive (18 gal or 68.1 L).
• A/C Refrigerant: Varies depending on the region.

Warnings and Recommendations

Use of Non-Specified Fluids

The service guide strongly warns against using oils and fluids that do not meet the specified requirements. Non-compliance could lead to:

• Component damage not covered by the vehicle warranty.
• Longer engine cranking periods.
• Increased emission levels.
• Reduced engine performance and fuel economy.
• Degraded brake performance.

Shop From Amazon

Valvoline Multi-Vehicle 50/50 Prediluted Ready-to-Use Antifreeze/Coolant 1 GA

Zerex G05 Phosphate Free 50/50 Prediluted Ready-to-Use Antifreeze/Coolant 1 GA

Motorcraft® Recommendations

For optimal performance, Motorcraft® oils and fluids are recommended. In situations where Motorcraft® is not available, it's advised to use oils that meet API SN requirements and display the API Certification Mark for gasoline engines.

Cold Climate Oil Viscosity

In extremely cold climates (ambient temperature reaching -22 °F or -30 °C and below), it's recommended to use Engine Oil - SAE 0W-30 (WSS-M2C953-A1) for better engine cold start performance.

Conclusion

Understanding and adhering to the specific coolant and fluid requirements of your 2019 Ford Escape is essential for maintaining its performance and longevity. Always refer to the service guide for detailed information and consult a qualified professional for servicing.

Remember, taking care of your vehicle is not just about regular maintenance, but also about using the right products that meet your car's specific needs.

Nick Marchenko, PhD

Industrial Engineer & Automotive Content Specialist

Nick writes in-depth guides on car clubs, engine specs, vehicle ownership, and modifications, combining engineering knowledge with automotive passion.

Full profile → LinkedIn →