2020 Toyota Corolla Owners Manual - Audio settings

Audio settings

Select to set the common settings. (P.323)

Select to set the radio set- tings. (P.323)

Select to set the cover art display on/off.

Select to prioritize the display of information from the Gra- cenote database.

Select to change the screen size.* (P.305)

Select to display the image quality adjustment screen.* (P.306)

*: Only in USB video mode

Operating information

FM is about 25 miles (40 km). Once outside this range, you

may notice fading and drifting,

The use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the audio/visual system which you are listening to. However, this does not indicate a malfunction.

For example, nearby buildings and terrain can interfere with FM reception. Power lines or phone wires can interfere with AM sig- nals. And of course, radio sig- nals have a limited range. The farther the vehicle is from a sta- tion, the weaker its signal will be. In addition, reception condi- tions change constantly as the vehicle moves.

Here are some common recep- tion problems that may not indi- cate a problem with the radio as described.

Fading and drifting stations: Generally, the effective range of

which increase with the distance from the radio transmitter. They are often accompanied by dis- tortion.

Multi-path: FM signals are reflective, making it possible for 2 signals to reach the vehicle’s antenna at the same time. If this happens, the signals will cancel each other out, causing a momentary flutter or loss of reception.

Static and fluttering: These occur when signals are blocked by buildings, trees or other large objects. Increasing the bass level may reduce static and flut- tering.

Station swapping: If the FM sig- nal being listened to is inter- rupted or weakened, and there is another strong station nearby on the FM band, the radio may tune in the second station until the original signal can be picked up again.

Fading: AM broadcasts are reflected by the upper atmo- sphere - especially at night. These reflected signals can interfere with those received directly from the radio station, causing the radio station to sound alternately strong and weak.

325

Static: AM is easily affected by external sources of electrical noise, such as high tension power lines, lightening or electri- cal motors. This results in static.

device or its compliance with safety and regulatory stan- dards. Please note that the use of this accessory with an Apple product may affect wireless performance.

U.S. and other countries.

The following iPod nano®, iPod touch® and iPhone® devices can be used with this system.

Made for

This device supports high-reso- lution sound sources.

The definition of high-resolution is based on the standards of groups such as the CTA (Con- sumer Technology Association).

Supported formats and play- able media are as follows.

WAV, FLAC, ALAC, OGG Vorbis

USB memory

*: USB video only

327

*1: Only compatible with Windows Media Audio Standard

*2: Sound source of 48kHz or more is down-converted to 48kHz/24bit.

*1: Variable Bit Rate (VBR) compati- ble

*2: Only compatible with Windows Media Audio Standard