2018 Toyota Corolla Owners Manual - Using the voice command system

Using the voice command system

Type A Type B

Select to start the voice rec- ognition tutorial.

Select“OK” and say the desired command.

On the list screen, you can select the desired command.

To cancel the voice command system, press and hold the talk switch.

360 5-11. Using the voice command system

Microphone

P. 323

When using the microphone

It is unnecessary to speak directly into the microphone when giving a com- mand.

When“Voice Prompt Interrupt” set to on, it is not necessary to wait for the confirmation beep before speaking a command. (P. 283)

Voice commands may not be recognized if:

Spoken too quickly.

Spoken at a low or high volume.

The roof or windows are open.

Passengers are talking while voice commands are spoken.

The air conditioning speed is set high.

The air conditioning vents are turned towards the microphone.

In the following conditions, the system may not recognize the command properly and using voice commands may not be possible:

The command is incorrect or unclear. Note that certain words, accents or speech patterns may be difficult for the system to recognize.

There is excessive background noise, such as wind noise.

In some situations, it is possible to omit the command for the proce- dure and directly state the desired operation.

Not all voice commands are displayed in the short cut menu. This function is available in English, Spanish and French.

Expression examples for each function

5-11. Using the voice command system

361

Basic

Phone

362 5-11. Using the voice command system

mode via the steering wheel switches. To operate the Mobile Assis- tant, a compatible cellular phone must be registered and connected to this system via Bluetooth®. (P. 312)

Press and hold the off-hook on the steering wheel until you hear the beeps.

Type A Type B

To cancel the Mobile Assistant, select“Cancel”, or press and hold the off-hook on the steering wheel.

To restart the Mobile Assistant for additional commands, press the off-hook on the steering wheel.

Mobile Assistant can only be restarted after the system responds to a voice command.

After some phone and music commands, the Mobile Assistant feature will automatically end to complete the requested action.

Adjusting the Mobile Assistant volume

5-11. Using the voice command system

363

Notes about Mobile Assistant

The available features and functions may vary based on the iOS version installed on the connected device.

Some Siri features are limited in Eyes Free mode. If you attempt to use an unavailable function, Siri will inform you that the function is not available.

If Siri is not enabled on the cellular phone connected via Bluetooth®, an error message will be displayed on the screen.

While a phone call is active, the Mobile Assistant cannot be used.

If using the navigation feature of the cellular phone, ensure the active audio source is Bluetooth® audio or iPod in order to hear turn by turn direction

prompts.

364 5-11. Using the voice command system