Connecting Bluetooth®
The Bluetooth® word mark and logos are registered trademarks owned Bluetooth SIG, Inc. and any use of such marks by Fujitsu Ten Limited is under license. Other trademarks and trade names are those of their respective owners.
5-7. Connecting Bluetooth®
307
WARNING
Changes or modifications not expressly approved by the party responsi- ble for compliance could void the user's authority to operate the equip- ment.
This equipment complies with IC radiation exposure limits set forth for uncontrolled equipment and meets RSS-102 of the IC radio frequency (RF) Exposure rules.
This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE).
But it is desirable that it should be installed and operated with at least 20cm and more between the radiator and person's body (excluding extremities: hands, wrists, feet and ankles).
- Cet équipement se conforme aux limites d’exposition aux radiations éta- blies par Industrie Canada pour un environnement non contrà´lé ainsi qu’aux directives d’exposition aux fréquences radioélectriques (RF) émises par Industrie Canada dans la norme CNR-102. Cet équipement émet un niveau d’énergie RF faible à un point tel qu’il se conforme sans devoir effectuer d’évaluation d’exposition maximum admissible (EMA).
Lorsque l’équipement est utilisé, il est toutefois souhaitable de laisser au moins 20cm entre l’antenne et le corps (à l’exception des extrémités : mains, poignets, pieds et chevilles).
308 5-7. Connecting Bluetooth®
phone
5-7. Connecting Bluetooth®
309
Select to connect the device to be used with Entune Audio. (P. 315)
Select to register a Bluetooth® device to be used with Entune Audio. (P. 312)
Select to set detailed Bluetooth® system settings. (P. 319)
Select to delete registered devices. (P. 314)
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
310 5-7. Connecting Bluetooth®
Select“
Audio”. Select“Select Device”.
Follow the steps in“How to registering a Bluetooth® device” from step . (P. 312)
5-7. Connecting Bluetooth®
311
Select“OK” to register a phone.
Follow the steps in“How to registering a Bluetooth® device” from step . (P. 312)
312 5-7. Connecting Bluetooth®
Select“Add”.
When this screen is displayed, search for the device name dis- played on this screen on the screen of your Bluetooth® device.
For details about operating the Bluetooth® device, see the manual that comes with it.
To cancel the registration, select“Cancel”.
A PIN-code is not required for SSP (Secure Simple Pairing) compatible Bluetooth® devices. Depending on the type of Bluetooth® device being connected, a message confirming registration may be displayed on the
Bluetooth® device’s screen. Respond and operate the Bluetooth® device according to the confirmation message.
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
5-7. Connecting Bluetooth®
313
If an error message is displayed, follow the guidance on the screen to try again.
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
314 5-7. Connecting Bluetooth®
Select“Remove”.
Select the desired device.
A confirmation message will be displayed, select“Yes” to delete the device.
Check that a confirmation screen is displayed when the operation is complete.
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
5-7. Connecting Bluetooth®
315
Select the device to be con- nected.
Supported profile icons will be dis- played.
Supported profile icons for cur- rently connected devices will illumi- nate.
Dimmed icons can be selected to connect to the function directly.
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
316 5-7. Connecting Bluetooth®
(P. 319)
When you register a phone, auto connection will be activated. Always set it to this mode and leave the Bluetooth® phone in a place where a connection can be established.
When the engine switch is turned to the“ACC” or“ON” position (vehicles without a smart key system) or ACCESSORY or IGNITION ON mode (vehicles with a smart key system), the system will search for a nearby cel- lular phone you have registered.
Next, the system automatically connects with the most recent of the phones connected to in the past. Then, the connection result is displayed.
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Follow the steps in“Connecting a Bluetooth® device” from step . (P. 315)
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Select“Select Device” on the Bluetooth® audio control screen. For more information: P. 312
Selecting a registered device
Select“Select Device” on the Bluetooth® audio control screen. For more information: P. 315
5-7. Connecting Bluetooth®
317
If the system cannot connect due to poor signal strength with the engine switch in the“ACC” or“ON” position (vehicles without a smart key system) or ACCESSORY or IGNITION ON mode (vehicles with a smart key system), the system will automatically attempt to reconnect.
If the system is attempting to connect to a Bluetooth® phone and the Bluetooth® phone is turned off and then back on, the system will attempt to reconnect.
318 5-7. Connecting Bluetooth®
You can confirm and change the registered device details.
Select the device. Select“Device Info”.
Following screen is displayed: Device Name
Change connection method
Bluetooth® Address
Display your telephone num- ber
The number may not be dis- played depending on the model of phone.
Compatibility profile of the device
Restore default settings
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
“Vehicle”: Connect Entune Audio to the portable audio player.“Device”: Connect the portable audio player to Entune Audio
5-7. Connecting Bluetooth®
319
Select“System Settings”.
The following screen is displayed: Bluetooth* Power on/off
You can change Bluetooth*
function on/off
You can set the system to show the status confirmation display when connecting a telephone
You can set the system to show the status confirmation display when connecting an audio player
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Select“Bluetooth* PIN”.
Input a PIN-code, and select“OK”.
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Download Manual