2015 Porsche Macan with

I had to put an unplanned 6mm spacer in the front, since the wheel was touching the caliper. I needed about 3mm to clear, but had some spacers left over from my S4 that fit. This made my front bolts to short though, so I used some longer cone seat bolts i had laying around.

Now I need to order 10 more bolts that are 6mm longer than the Tikore rears.

The tire reduced the gap some as well. Its 10mm taller than the stock ones.

Ill clean the car up soon, and take some final pictures. These are off a phone, and the car is dirty. Was a long day sorting this out though.