Instrument Cluste
E219638
D Transmission fluid temperature gauge. E Speedometer.
F Information display. See General Information (page 112). G Tachometer.
104
E219651
A B C D
E F G
Engine oil pressure gauge.
Engine coolant temperature gauge. Fuel gauge.
Configurable. Transmission fluid temperature, Turbo boost or DEF gauge (diesel engines only).
Speedometer.
Information display. See General Information (page 112). Tachometer.
105
Indicates engine oil pressure. The needle should stay in the normal operating range (between L and H). If the needle falls below the normal range, stop your vehicle, turn off the engine and check the engine oil level. Add oil if needed. If the oil level is correct, have your vehicle checked by an authorized dealer.
|
|
WARNING: Do not remove the coolant reservoir cap when the engine is on or the cooling system is hot. Wait 10 minutes for the cooling system to cool down. Cover the coolant reservoir cap with a thick cloth to prevent the possibility of scalding and slowly remove the cap. Failure to follow this instruction could result in personal injury.Indicates engine coolant temperature. At normal operating temperature, the level indicator will be in the normal range. If the engine coolant temperature exceeds the normal range, stop your vehicle as soon as safely possible, switch off the engine and let the engine cool.
Note: The fuel gauge may vary slightly when your vehicle is moving or on a slope.
The fuel gauge indicates about how much fuel is in the fuel tank.
The arrow adjacent to the fuel pump symbol indicates on which side of your vehicle the fuel filler door is located.
A low fuel level reminder displays and sounds when the distance to empty reaches 75 mi (120 km) to empty for MyKey, and at 50 mi (80 km), 25 mi
(40 km), 10 mi (20 km) and 0 mi (0 km) for all vehicle keys.
Note: The low fuel reminder can appear at different fuel gauge positions depending on fuel economy conditions. This variation is normal.
Indicates transmission fluid temperature. At normal operating temperature, the level indicator will be in the normal range. If the transmission fluid temperature exceeds the normal range, stop the vehicle as soon as safely possible and verify the airflow is not restricted such as snow or debris blocking airflow through the grill. Also, higher than normal operating temperature can be caused by special operation conditions (i.e. snowplowing, towing or off-road use). Operating the transmission for extended periods with the gauge in the higher than normal area may cause internal transmission damage. You need to alter the severity of your driving conditions to lower the transmission temperature into the normal range. If the gauge continues to show high temperatures, see an authorized dealer.
Indicates the amount of manifold air pressure in the engine.
DEF Gauge (If Equipped)
Indicates the current DEF level.
106
The following warning lamps and indicators alert you to a vehicle condition that may become serious. Some lamps illuminate when you start your vehicle to make sure they work. If any lamps remain on after starting your vehicle, refer to the respective system warning lamp for further information.
Note: Some warning indicators appear in the information display and operate the same as a warning lamp but do not illuminate when you start your vehicle.
The speed control system indicator light changes color to indicate what mode the system
is in. See Using Adaptive Cruise Control
(page 242).
On (white light): Illuminates when the adaptive cruise control system is turned on. Turns off when the speed control system is turned off.
Engaged (green light): Illuminates when the adaptive cruise control system is engaged. Turns off when the speed control system is disengaged.
The adaptive steering system indicator illuminates if the system detects a fault during the
continuous diagnostic checks.
Adaptive Steering Initialization (yellow, flashing): The adaptive steering system has detected a difference between steering wheel angle and the desired road wheel angle. The steering wheel adjusts itself to correct this difference. This adjustment is part of normal system operation.
Adaptive Steering Off (yellow, solid): The adaptive steering system is off. It is possible that the steering wheel may not be straight when the vehicle is driving straight ahead. If this message persists, see an authorized dealer.
Adaptive Steering Loss (red, solid): The adaptive steering system integrity cannot be verified. Do not drive the vehicle and contact an authorized dealer immediately. See Steering (page 260).
It illuminates momentarily when you switch on the ignition to confirm that the lamp is
functional. If it does not illuminate when you switch on the ignition or begins to flash at anytime, have the system checked as soon as possible.
If it illuminates when you are driving, this indicates a malfunction. You will continue to have the normal braking system (without ABS) unless the brake system warning lamp is also illuminated. Have the system checked as soon as possible.
Illuminates when this feature is on. See Automatic High Beam Control (page 93).
107
If it illuminates while driving, it indicates a malfunction. Switch off all unnecessary electrical
Check Fuel Cap (If Equipped)
Illuminates when the fuel cap may not be properly installed. Continued driving with this light
equipment and have the system checked
by your authorized dealer immediately.
|
Driving extended distances with the parking brake engaged can cause brake failure and the risk of personal injury. |
WARNING: Driving your vehicle with the warning lamp on is dangerous. A significant decrease in braking performance may occur. It may take you longer to stop your vehicle. Have your vehicle checked as soon as possible.Note: Indicators vary depending on region.
This lamp is a dual function lamp and will illuminate when:
If the lamp illuminates while you are moving, you may have the parking brake applied. Be sure that the parking brake is off.
Have your vehicle checked as soon as possible if the lamp
continues to illuminate.
It illuminates when you switch this feature off or in conjunction with a message. See Blind Spot
Information System (page 253).
on may cause the Service engine soon warning indicator to come on.
Check 4X4 (If Equipped)
Illuminates with the message Check 4x4 when a four-wheel drive fault is present. See Using
Four-Wheel Drive (page 212).
Illuminates when you switch this feature on. See Using Cruise Control (page 241).
Illuminates when you switch the manual engine brake on. See General Information (page
223).
Illuminates when you switch the automatic engine brake on. See General Information (page
223).
With the key in the on position, illuminates when the DEF is contaminated, low or someone
has tampered with the DEF system. See Selective Catalytic Reductant System (page 196).
108
Illuminates when the left or right turn signal or the hazard warning flasher is turned on. If the
indicators stay on or flash faster, check for a burned out bulb.
Displays when the ignition is on and any door is not completely closed.
Illuminates when using the electronic locking differential.
Illuminates when the engine coolant temperature is high.
Stop the vehicle as soon as possible, switch off the engine and let cool.
If it illuminates with the engine running or when you are driving, this indicates a malfunction.
Stop your vehicle as soon as it is safe to do so and switch the engine off. Check the engine oil level.
See Engine Oil Check (page 334).
Note: Do not resume your journey if it illuminates despite the level being correct. Have the system checked by your authorized dealer immediately.
It illuminates and a chime sounds to remind you to fasten your seatbelt.
If it fails to illuminate when you start your vehicle, continues to flash or remains on, it indicates
a malfunction. Have the system checked by your authorized dealer.
It illuminates when you switch the front fog lamps on.
Illuminates when you switch the high beam headlamps on. It will flash when you use the
headlamp flasher.
Hill Descent (If Equipped)
Illuminates when hill descent is switched on.
Illuminates when the fuel level is low or the fuel tank is nearly empty. Refuel as soon as
possible.
It illuminates if the tire pressure in one or more tires is below the correct tire pressure.
It also illuminates momentarily when you switch the ignition on to confirm the lamp is functional. If it does not illuminate when you switch the ignition on, or begins to flash at any time, have the system checked by your authorized dealer.
109
Illuminates when a powertrain or a 4WD fault has been detected. Contact your
authorized dealer as soon as possible.
If it illuminates when the engine is running this indicates a malfunction. The On Board
Diagnostics system has detected a malfunction of the vehicle emission control system.
If it flashes, engine misfire may be occurring. Increased exhaust gas temperatures could damage the catalytic converter or other vehicle components. Drive in a moderate fashion (avoid heavy acceleration and deceleration) and have your vehicle immediately serviced.
It illuminates when you switch the ignition on prior to engine start to check the bulb and to indicate whether your vehicle is ready for Inspection and Maintenance (I/M) testing.
Normally, it illuminates until the engine is cranked and automatically turns off if no malfunctions are present. However, if after 15 seconds it flashes eight times, this indicates that your vehicle is not ready for Inspection and Maintenance (I/M) testing. See Emission Law (page 193).
Illuminates when the system is active. If it remains illuminated or does not illuminate when you
switch the ignition on, this indicates a malfunction. During a malfunction the system will switch off. Have the system checked by your authorized dealer immediately. See Using Stability Control (page 229).
Illuminates when you switch the system off. It will go out when you switch the system back on
or when you switch the ignition off.
See Using Stability Control (page 229).
Illuminates when the tow/haul feature has been activated. If the light flashes steadily, have the
system serviced immediately, damage to the transmission could occur.
Wait To Start (If Equipped)
Illuminates when you switch the ignition on as part of the
pre-start system. Wait until the wait to start indicator turns off before attempting to start vehicle. See Starting a Diesel Engine (page 176).
Water In Fuel (If Equipped)
|
|
WARNING: Do not drain the water-in-fuel separator while the engine is running. Failure to follow this warning may result in fire, serious injury, death or property damage.During refueling, it is possible for you to pump
water-contaminated diesel fuel into your fuel tank. Your vehicle’s fuel system is equipped with a fuel filter and water separator to remove water from the fuel. The water in fuel indicator lights when the fuel and water separator has a significant quantity of water in it and requires immediate draining.
110
If the water in fuel indicator illuminates when the engine is running, stop your vehicle as soon as safely possible, shut off the engine, then drain the fuel and water separator. See Fuel Quality (page 185). Allowing water to stay in the fuel system, after the water in fuel indicator illuminates, could result in extensive damage or failure of the fuel injection system.
Note: Do not drain the fuel and water separator while the engine is running. Air will enter into the fuel system causing the engine not to operate properly.
4X2 (If Equipped)
Illuminates momentarily when two-wheel drive high is selected.
If the light fails to display when the ignition is turned on, or remains on, have the system serviced immediately by your authorized dealer.
4X4 HIGH (If Equipped)
Illuminates when four-wheel drive high is engaged. If the light fails to display when the ignition
is turned on, or remains on, have the system serviced immediately by your authorized dealer.
4X4 LOW (If Equipped)
Illuminates when four-wheel drive low is engaged. If the light fails to display when the ignition
is turned on, or remains on, have the system serviced immediately by your authorized dealer.
Sounds when you remove the key from the ignition and open the driver's door and you have left the headlamps or parking lamps on.
Sounds when you open the driver's door and you have left the key in the ignition.
Sounds when you have left the parking brake on and drive your vehicle. If the warning chime remains on after you have released the parking brake, have the system checked by your authorized dealer immediately.
111
Download Manual