2019 Dodge Charger Owners Manual - BULB REPLACEMENT

BULB REPLACEMENT

Replacement Bulbs

All of the interior bulbs are glass wedge base or glass cartridge types. Aluminum base bulbs are not approved and should not be used for replacement.

7

Exterior Bulbs

Replacing Exterior Bulbs

Front Low/High Beam Headlamp — Models With Halogen Headlamps

Open the hood.

NOTE: Removal of the air cleaner filter housing may be necessary prior to replacing bulbs in the headlamp assem- bly on the driver side of the vehicle.

Remove the large dust cap from the headlamp housing by turning it counterclockwise.

Turn the bulb counterclockwise, and remove.

Front Low/High Beam Headlamp — Models With High Intensity Discharge Headlamps (HID)

The headlamps are a type of high voltage discharge tube. High voltage can remain in the circuit even with the headlamp switch off and the key removed. Because of this, you should not attempt to service a headlamp bulb yourself. If a headlamp bulb fails, take your vehicle to an authorized dealer for service.

Disconnect the bulb from the socket assembly and install the replacement bulb.

Reinstall the bulb and socket assembly into the head- lamp assembly, and then turn it clockwise.

Reinstall the dust cap.

NOTE: On vehicles equipped with HID headlamps, when the headlamps are turned on, there is a blue hue to the lights. This diminishes and becomes more white after approximately 10 seconds, as the system charges.

Front/Rear Side Marker Lamp

The Side Markers use LED lamps that are not serviceable separately. The Side Markers must be replaced as an assembly, see your authorized dealer.

Front Fog Lamp

The Front Fog Lamps use LED sources that are not serviceable separately. The Front Fog Lamp must be re- placed as an assembly; see your authorized dealer.

Front Turn Signal Lamps

The Front Park/Turn function is part of the headlamp assembly and use LED lamps that are not serviceable separately. The headlamps must be replaced as an assem- bly, see your authorized dealer.

Backup Lamps 7

The Backup Lamps use LED sources that are not service- able separately. The Applique must be replaced as an assembly; see your authorized dealer.

License Lamp

The License Lamp uses an LED source that is not service- able separately. The License Lamp must be replaced as an assembly; see your authorized dealer.

Center High Mounted Stop Lamp (CHMSL)

The CHMSL Lamp uses LED sources that are not service- able separately. The CHMSL Lamp must be replaced as an assembly; see your authorized dealer.

The fuses protect electrical systems against excessive current.