2023 Chrysler Pacifica Owners Manual - Uconnect Settings

1 — Uconnect Buttons On The Touchscreen

2 — Uconnect Buttons On The Faceplate

The vehicle’s KeySense settings are protected by a unique four-digit PIN, which the vehicle owner creates when accessing the specific settings for the first time. This four-digit PIN can only be reset by an authorized dealer.

After pressing the KeySense button on the touchscreen, and entering the KeySense PIN, the following settings will be available:

Note:

Depending on the vehicle’s options, feature settings may vary.

Forward Collision Warning Sensitivity

This setting will change the distance at which the Forward Collision Warning (FCW) alert sounds. The “Medium” setting will have the FCW system signal when an object is in view, and the possibility of a collision is detected. The “Near” setting will have the FCW system signal when the object is closer to the vehicle. The “Far” setting will have the FCW system signal when an object is at a far distance from the vehicle.

Forward Collision Warning

This setting will turn the Forward Collision Warning system on or off. The “Warning Only” setting will provide only an audible chime when a collision is detected. The “Warning + Active Braking” setting will provide an audible chime and apply some brake pressure when a collision is detected.

ParkSense

This setting will change the type of ParkSense alert when a close object is detected. The “Sound Only” setting will provide an audible chime when an object is detected. The “Sound and Display” setting will provide both an audible chime and a visual display when an object is detected.

Front ParkSense Volume

This setting adjusts the volume of the Front ParkSense system. The available settings are “Low”, “Medium”, and “High”.

Rear ParkSense Volume

This setting adjusts the volume of the Rear ParkSense system. The available settings are “Low”, “Medium”, and “High”.

Rear ParkSense Braking Assist

This setting will turn the Rear ParkSense Braking Assist on or off.

Blind Spot Alert

This setting will change the type of alert provided when an object is detected in a vehicle’s blind spot. The “Lights” setting will activate the Blind Spot Alert lights on the outside mirrors. The “Lights & Chime” setting will activate both the lights on the outside mirrors and an audible chime.

Maximum Vehicle Speed

This setting adjusts the Maximum Vehicle Speed. This feature can be set to 65, 70, 75, 80, or 85 mph (90, 95, 100, 105 or 110 km/h) by using the “-” and “+” options.

Start Up Fuel Level Message

This setting will turn the Start Up Fuel Level Message on or off.

Earlier Low Fuel Alert

This setting will turn the Earlier Low Fuel Alert on or off.

When the My Profile button is pressed on the touchscreen, the system displays options related to the vehicle’s profiles.

Note:

Depending on the vehicle’s options, feature settings may vary.

Language

This setting will change the language of the Uconnect system and Instrument Cluster Display. The available languages are English, Français, Español, and Italiano.

Display Mode

The setting will adjust the display for the radio to “Auto” or “Manual”. “Manual” allows for more customization with the radio display.

Display Brightness Headlights On

This setting will allow you to set the brightness when the headlights are on. To access this setting, Display Mode must be set to “Manual”. The “+” setting will increase the brightness; the “-” will decrease the brightness.

Display Brightness Headlights Off

This setting will allow you to set the brightness when the headlights are off. To access this setting, Display Mode must be set to “Manual”. The “+” setting will increase the brightness; the “-” will decrease the brightness.

Set Theme

This setting will allow you to change the theme of the radio.

Theme Mode

This setting will allow you to adjust the brightness of your theme. Setting options are “Light”, “Dark” and “Auto”. Select to show themes in Light or Dark mode. “Auto” changes the theme with the headlights.

Units

This setting changes the “Speed” (MPH or km/h), “Distance” (mi or km), “Fuel Consumption” (MPG [US], MPG [UK], L/100 km, or km/L), “Pressure” (psi, kPa, or bar), “Temperature” (°C or °F), and “Current Consumption” (MPG [US], MPG [UK], L/100 km, or km/L) units of measurement independently.

Touchscreen Beep

This setting will allow you to turn the touchscreen beep on or off.

Show Main Category Bar Labels

This setting will allow the main category bar labels to be shown on or off.

Navigation Next Turn Displayed in Cluster

This setting will display navigation prompts in the Instrument Cluster Display.

Phone Pop-Ups Displayed In Cluster

This setting will display smartphone notifications and messages in the Instrument Cluster Display.

System Text Size

This setting will allow you to change the text on the radio to “Standard”, “Large”, and “Taller”.

Time Format

This setting will allow you to set the time format (AM/PM). Sync Time With GPS must be “Off” for this setting to be available. The “12 hrs” setting will set the time to a 12-hour format. The “24 hrs” setting will set the time to a 24-hour format.

Voice Options

This setting will allow you to change the voice options for the radio to “Male” or “Female”.

Wake Up Word

This setting will allow you to turn the voice recognition “Wake Up” word on or off.

Voice Barge-in

This setting will allow you to turn the voice recognition barge-in feature on or off.

Show Command List

This setting will allow the Command List to be shown on or off.

Key Off Power Delay

This setting will keep certain electrical features running after the engine is turned off. When any door is opened, the electronics will deactivate. The available settings are “0 sec”, “45 sec”, “5 min”, and “10 min”.

Radio Off With Door

This setting will turn the radio off when the driver or passenger door is opened. The available settings are “On” and “Off”.

App Drawer Favoriting Popups

This setting will allow you to favorite app drawer pop-ups with “On” and “Off” options.

App Drawer Unfavoritings Popups

This setting will allow you to unfavorite app drawer pop-ups with “On” and “Off” options.

New Text Message Popups

This setting will allow you to have pop-up notifications for new text messages. This setting options are “On” and “Off”.

Missed Calls Message

This setting will allow you to have pop-up notifications for missed calls. This setting options are “On” and “Off”.

Navigation Popups

This setting will allow you to have pop-up notifications for Navigation. This setting options are “On” and “Off”.

Navigation Settings

This setting will allow you to customize the settings within Navigation Mode.

Auto-On Driver Heated Seat & Steering Wheel

This setting will activate the vehicle’s comfort systems and heated seats or heated steering wheel when the vehicle is remote started or ignition is started. The “Off” setting will not activate the comfort systems. The “Remote Start” setting will only activate the comfort systems when using Remote Start. The “All Start” setting will activate the comfort systems whenever the vehicle is started.

Audio Settings

This setting will take you to the audio settings for the vehicle profiles.

Reset App Drawer to Default Order

This setting will reset the app drawer to its factory default layout.

Restore Settings to Default

This setting will return all the previously changed settings to their factory defaults.

More Profile Options

This setting will give access to more profile options.

After pressing the Display button on the touchscreen, the following settings will be available:

Note:

Depending on the vehicle’s options, feature settings may vary.

Language

This setting will change the language of the Uconnect system and Instrument Cluster Display. The available languages are English, Français, Español, and Italiano.

Display Mode

This setting will allow you to set the brightness manually or have the system set it automatically. The “Auto” setting has the system automatically adjust the display brightness. The “Manual” setting will allow the user to adjust the brightness of the display.

Display Brightness With Headlights ON/Brightness

This setting will allow you to set the brightness when the headlights are on. To access this setting, Display Mode must be set to “Manual”. The “+” setting will increase the brightness; the “-” will decrease the brightness.

Display Brightness With Headlights OFF/Brightness

This setting will allow you to set the brightness when the headlights are off. To access this setting, Display Mode must be set to “Manual”. The “+” setting will increase the brightness; the “-” will decrease the brightness.

Set Theme

This setting will allow you to change the theme of the radio.

Theme Mode

This setting will allow you to adjust the brightness of your theme. Setting options are “Light”, “Dark” and “Auto”. Select to show themes in Light or Dark mode. “Auto” changes the theme with the headlights.

Units

This setting changes the “Speed” (MPH or km/h), “Distance” (mi or km), “Fuel Consumption” (MPG [US], MPG [UK], L/100 km, or km/L), “Pressure” (psi, kPa, or bar), “Temperature” (°C or °F), and “Current Consumption” (MPG [US], MPG [UK], L/100 km, or km/L) units of measurement independently.

Touchscreen Beep

This setting will allow you to turn the touchscreen beep on or off.

Show Main Category Bar Labels

This setting will allow the main category bar labels to be shown on or off.

Control Screen Timeout

This setting allows you to set the Control Screen to turn off automatically after five seconds or stay open until manually closed.

Navigation Next Turn Displayed in Cluster

This setting will display navigation prompts in the Instrument Cluster Display.

Phone Pop-Ups Displayed In Cluster

This setting will display smartphone notifications and messages in the Instrument Cluster Display.

Ready To Drive Pop-Ups

This setting will enable the Ready To Drive Pop-Ups in the Instrument Cluster Display.

After pressing the Safety & Driving Assistance button on the touchscreen, the following settings will be available:

Note:

Depending on the vehicle’s options, feature settings may vary.

Forward Collision Warning Sensitivity — Located In Automatic Emergency Braking Submenu

This setting will change the distance at which the Forward Collision Warning (FCW) alert sounds. The “Medium” setting will have the FCW system signal when an object is in view, and the possibility of a collision is detected. The “Near” setting will have the FCW system signal when the object is closer to the vehicle. The “Far” setting will have the FCW system signal when an object is at a far distance from the vehicle.

Forward Collision Warning — Located In Automatic Emergency Braking Submenu

This setting will turn the Forward Collision Warning system on or off. The “Off” setting will deactivate the FCW system. The “Warning Only” setting will provide only an audible chime when a collision is detected. The “Warning + Active Braking” setting will provide an audible chime and apply some brake pressure when a collision is detected.

Pedestrian Emergency Braking — Located In Automatic Emergency Braking Submenu

This setting will turn the Pedestrian Emergency Braking system “Off” or “Warning + Active Braking”.

LaneSense Warning — Located In LaneSense Submenu

This setting will change the distance at which the steering wheel will provide lane departure feedback. The available settings are “Early”, “Medium”, and “Late”.

LaneSense Strength — Located In LaneSense Submenu

This setting will change the strength of the steering wheel feedback during a lane departure. The available settings are “Low”, “Medium”, and “High”.

ParkSense

This setting will change the type of ParkSense alert when a close object is detected. The “Sound Only” setting will provide an audible chime when an object is detected. The “Sound and Display” setting will provide both an audible chime and a visual display when an object is detected.

Front ParkSense Volume

This setting adjusts the volume of the Front ParkSense system. The available settings are “Low”, “Medium”, and “High”.

Rear ParkSense Volume

This setting adjusts the volume of the Rear ParkSense system. The available settings are “Low”, “Medium”, and “High”.

Rear ParkSense Braking Assist

This setting will turn the Rear ParkSense Braking Assist on or off.

Sliding Door Alert

This setting will turn the Sliding Door Alert on and off.

Blind Spot Alert

This setting will change the type of alert provided when an object is detected in a vehicle’s blind spot. The “Off” setting will turn off Blind Spot Alert. The “Lights” setting will activate the Blind Spot Alert lights on the outside mirrors. The “Lights + Chime” setting will activate both the lights on the outside mirrors and an audible chime.

Hill Start Assist

This setting will turn the Hill Start Assist system on or off.

KeySense

This setting will access KeySense features.

Rear Seat Alert

When this setting is turned on and the rear doors are opened while the engine is running, or if the engine is turned on within 10 minutes of the door opening, a message will appear to check the rear seat when the vehicle is powered OFF.

After pressing the Clock & Date button on the touchscreen, the following settings will be available:

Note:

Depending on the vehicle’s options, feature settings may vary.

Sync Time With GPS

This setting will sync the time to the GPS receiver in the system. The system will control the time via the GPS location.

Set Time

This setting will allow you to manually set the time of your clock.

Time Format

This setting will allow you to set the time format (AM/PM). Sync Time With GPS must be off for this setting to be available. The “12 hrs” setting will set the time to a 12-hour format. The “24 hrs” setting will set the time to a 24-hour format.

Set Date

This setting will allow you to set the date by day, month, and year (DD/MM/YY).

Set Time Hours

This setting will allow you to set the hours. Sync Time With GPS must be off for this setting to be available. The “+” setting will increase the hours. The “-” setting will decrease the hours.

Set Time Minutes

This setting will allow you to set the minutes. Sync Time With GPS must be off for this setting to be available. The “+” setting will increase the minutes. The “-” setting will decrease the minutes.

Show Time in Status Bar

This setting will place the time in the radio’s status bar.

When the Phone/Bluetooth® button is pressed on the touchscreen, the system displays the options related to Bluetooth® connectivity from an external audio device or smartphone. The list of paired audio devices or smartphones can be accessed from this menu.

Note:

Depending on the vehicle’s options, feature settings may vary.

Device Manager

This setting will open the Device Manager main screen.

Do Not Disturb

This setting will open the Do Not Disturb settings menu. The settings are “Auto Reply” (both, text, call), “Auto Reply Message” (custom, default), and “Custom Auto Reply Message” (create message).

Do Not Disturb All

This setting will open the “Do Not Disturb All” settings menu. The available options are “On” and “Off”.

Enable Two Active Phones

This setting will enable or disable two active phones with the vehicle. The setting options are “On” and “Off”.

Phone Pop-Ups Displayed In Cluster

This setting will activate phone message pop-ups in the Instrument Cluster Display.

After pressing the Voice button on the touchscreen, the following settings will be available:

Note:

Depending on the vehicle’s options, feature settings may vary.

Voice Options

This setting will allow you to change the voice options for the radio to “Male” or “Female”.

Wake Up Word

This setting will allow you to turn the voice recognition “Wake Up” word on or off.

Voice Barge-In

This setting will allow you to turn the voice recognition barge-in feature on or off.

Show Command List

This setting will allow you to turn the Command List on or off. The “Always” setting will always show the Command List. The “With Help” setting will show the Command List and provide a brief description of what the command does. The “Never” setting will turn the Command List off.

When the Navigation button is pressed on the touchscreen, the system displays options related to the vehicle’s built-in Navigation system. These settings can change which icons display on the map, how “time to arrival is calculated”, and route types.

For more information on Navigation and settings, refer to your Uconnect Radio Instruction Manual.

Note:

Depending on the vehicle’s options, feature settings may vary.

When the Camera button is pressed on the touchscreen, the system displays the options related to the vehicle’s camera features.

Note:

Depending on the vehicle’s options, feature settings may vary.

Surround View Camera Delay

This setting will add a timed delay to the Surround View Camera when shifting out of REVERSE.

Surround View Camera Guidelines

This setting will turn the Surround View Camera Guidelines on or off.

ParkView Backup Camera Delay

This setting will add a timed delay to the ParkView Backup Camera when shifting out of REVERSE.

ParkView Backup Camera Active Guidelines

This setting will turn the ParkView Backup Camera Active Guidelines on or off.

ParkView Backup Camera Fixed Guidelines

This setting will turn the ParkView Backup Camera Fixed Guidelines on or off.

When the Mirrors & Wipers button is pressed on the touchscreen, the system displays the options related to the vehicle’s mirrors and wipers.

Note:

Depending on the vehicle’s options, feature settings may vary.

Tilt Side Mirrors In Reverse

This setting will tilt the outside side-view mirrors when the ignition is in the ON/RUN position and the transmission gear selector is in the REVERSE position. The mirrors will move back to their previous position when the transmission is shifted out of REVERSE. The available settings are “On” and “Off”.

Auto Folding Side Mirrors

This setting will automatically fold and unfold the side-view mirrors when the vehicle is turned off, the doors are locked, or the key fob button is pushed. The available options are “On” and “Off”.

Rain Sensing Auto Wipers

This setting will turn the Rain Sensing Auto Wipers on or off.

Headlights With Wipers

This setting will turn the headlights on when the wipers are activated.

When the Lights button is pressed on the touchscreen, the system displays the options related to the vehicle’s exterior and interior lights.

Note:

• When the “Daytime Running Lights” feature is selected, the daytime running lights can be turned on or off. This feature is only allowed by law in the country of the vehicle purchase.

• Depending on the vehicle’s options, feature settings may vary.

Headlight Off Delay

This setting will allow you to set the amount of time it takes for the headlights to shut off after the vehicle is turned off. The available settings are “0 sec”, “30 sec”, “60 sec”, and “90 sec”.

Headlight Illumination On Approach

This setting will allow you to set the amount of time it takes for the headlights to shut off after the vehicle is unlocked. The available settings are “0 sec”, “30 sec”, “60 sec”, and “90 sec”.

Headlights with Wipers

This setting will turn the headlights on when the wipers are activated.

Daytime Running Lights

This setting will allow you to turn the Daytime Running Lights on or off.

Flash Lights With Lock

This setting will allow you to turn the flashing of the lights when the Lock button is pushed on the key fob on or off.

Auto Dim High Beams

This setting will allow you to turn the Auto Dim High Beams on or off.

Flash Lights With Sliding Door

This setting will flash the lights when the sliding door reverses. The available options are “On” and “Off”.

After pressing the Brakes button on the touchscreen, the following settings will be available:

Note:

Depending on the vehicle’s options, feature settings may vary.

Auto Park Brake

This setting will turn the Auto Park Brake on or off.

Brake Service

This setting will allow you to retract the brakes for servicing.

After pressing the Doors & Locks button on the touchscreen, the following settings will be available:

Auto Unlock On Exit

This setting will unlock the doors when any of the doors are opened from the inside.

Flash Lights With Lock

This setting will allow you to turn the flashing of the lights when the Lock button is pushed on the key fob on or off.

Sound Horn With Lock

This setting will sound the horn when the Lock button is pushed on the key fob. The “Off” setting will not sound the horn when the Lock button is pushed. The “1st Press” setting will sound the horn when the Lock button is pushed once. The “2nd Press” setting will sound the horn when the Lock button is pushed twice.

Sound Horn With Remote Start

This setting will sound the horn when the remote start is activated from the key fob.

Remote Door Unlock, Door Lock/1st Press Of Key Fob Unlocks

This setting will change how many pushes of the Unlock button on the key fob are needed to unlock all the doors. The “Driver Door” setting will only unlock the driver door on the first push on the Unlock button. The “All Doors” setting will unlock all doors with only one push of the Unlock button.

Passive Entry

This setting will allow you to turn the Passive Entry feature (Keyless Enter ‘n Go™) on or off.

Personal Settings Linked To Key Fob

This setting will recall preset radio stations and driver seat position that have been linked to the key fob.

Power Liftgate Alert

This setting will chime an audible alert when the power liftgate is raising or lowering. Selectable options are “On” and “Off”.

Sliding Door Alert

This setting will chime an audible alert when the sliding door reverses or sense an obstacle. Selectable options are “On” and “Off”.

Flash Lights with Sliding Door

This setting will flash the lights when the sliding door is opening. Selectable options are “On” and “Off”.

Hands Free Power Liftgate

This setting will use hands-free technology to automatically open the power liftgate. Selectable options are “On” and “Off”.

Hands Free Power Sliding Door

This setting will use hands-free technology to automatically open the power sliding doors. Selectable options are “On” and “Off”.

When the Seats & Comfort button is pressed on the touchscreen, the system displays the options related to the vehicle’s comfort systems when remote start has been activated or the vehicle has been started.

Note:

Depending on the vehicle’s options, feature settings may vary.

Auto-On Driver Heated/Ventilated Seat & Heated Steering Wheel With Vehicle Start

This setting will activate the vehicle’s comfort systems and heated seats or heated steering wheel when the vehicle is remote started or ignition is started. The “Off” setting will not activate the comfort systems. The “Remote Start” setting will only activate the comfort systems when using Remote Start. The “All Start” setting will activate the comfort systems whenever the vehicle is started.

Easy Exit Seats

This setting will automatically move the driver seat rearward when the engine is shut off. The available settings are “On” and “Off”.

3rd Row Seat Recline Lockout

This setting will activate the 3rd row seat recline lockout. Selectable options are “Off”, “Lock On Ignition”, and “Always Locked”.

When the Key Off Options button is pressed on the touchscreen, the system displays the options related to vehicle shutoff. These settings will only activate when the ignition is set to OFF.

Note:

Depending on the vehicle’s options, feature settings may vary.

Easy Exit Seat

This setting adjusts the seats to make exiting the vehicle easier.

Key Off Power Delay

This setting will keep certain electrical features running after the engine is turned off. When any door is opened, the electronics will deactivate. The available settings are “0 sec”, “45 sec”, “5 min”, and “10 min”.

Headlight Off Delay

This setting will allow you to set the amount of time the headlights remain on after the vehicle has been turned off. The “+” will increase the amount of time. The “-” will decrease the amount of time.

Radio Off With Door

This setting will turn the radio off when the driver or passenger door is opened. The available settings are “On” and “Off”.

When the Audio button is pressed on the touchscreen, the system displays options related to the vehicle’s sound system. These settings can change the audio location within the vehicle, adjust the bass or treble levels, and auto-play settings from an audio device or smartphone.

Note:

Depending on the vehicle’s options, feature settings may vary.

Balance/Fade

This setting will adjust audio levels from specific speakers in the front/back and left/right of the vehicle. The Speaker icon can be moved to set audio location.

Equalizer

This setting will adjust the “Bass”, “Mid”, and “Treble” ranges of the audio.

Speed Adjusted Volume

This setting will adjust audio volume as speeds increase. At a higher setting, the volume will increase more as the vehicle speeds up. The available settings are “Off”, “1”, “2”, and “3”.

Surround Sound

This setting will turn the Surround Sound system on or off.

AUX Volume Offset

This setting will tune the audio levels from a device connected through the AUX port. The available settings are “+” and “-”.

Auto Play

This setting will automatically begin playing audio from a connected device.

Auto On Radio

This setting will automatically turn on when the vehicle is in ON/RUN or will recall whether it was on or off at last ignition OFF. The selectable options are “On”, “Off”, and “Recall Last”.

Volume Adjustment

This setting allows you to adjust the volume levels for features such as Media, Phone, Navigation, and Voice Recognition.

When the Notifications button is pressed on the touchscreen, the system displays the options related to Notifications for the system.

Note:

Depending on the vehicle’s options, feature settings may vary.

App Drawer Favoriting Popups

This setting turns the App Favorited pop-up on or off.

App Drawer Unfavoriting Popups

This setting turns the App Unfavorited pop-up on or off.

New Text Message Popups

This setting turns receiving/storing a pop-up for new text messages of any connected phone on or off.

Missed Calls Message

This setting turns receiving/storing a pop-up for missed calls of any connected phone on or off.

Navigation Popups

This setting turns navigation pop-ups on or off.

SiriusXM® Travel Link Weather Alerts

The setting turns receiving notifications for SiriusXM® Travel Link Weather Alerts on or off.

When the SiriusXM® Setup button is pressed on the touchscreen, the system displays options related to SiriusXM® satellite radio. These settings can be used to skip specific radio channels and restart favorite songs from the beginning.

Note:

• A subscription to SiriusXM® satellite radio is required for these settings to be functional.

• Depending on the vehicle’s options, feature settings may vary.

SiriusXM® Account, Profiles & Settings

This setting will allow you to view your SiriusXM® account information, profiles linked to the system, and the various settings you have saved and stored to those profiles.

Block Explicit

This setting will allow you to block explicit content by turning it on or off.

When pressing the Accessibility button on the touchscreen, the system will display options related to the vehicle’s theater system.

Note:

Depending on the vehicle’s options, feature settings may vary.

Accessibility

The Accessibility feature announces a function prior to performing the action selected when using DVD/Blu-ray™ and USB Video functions, when it is activated. For example, when activated, and the Play button is selected, the system will announce “Play button selected”, and then once pressed again the Play button will perform its action.

Video Button Readback

This setting will turn the Video Button Readback feature on or off.

When the Software Updates button is pressed on the touchscreen, the system will display information on updating the Uconnect system’s software.

Note:

Depending on the vehicle’s options, feature settings may vary.

Software Downloads over Wi-Fi

This setting will allow software updates to happen over Wi-Fi. Selectable options for the setting are “On” and “Off”.

When the System Information button is pressed on the touchscreen, the system displays the radio system information.

Note:

Depending on the vehicle’s options, feature settings may vary.

Version Information

When this feature is selected, a Version Information screen will appear, displaying information about the version of your radio.

License Information

When this feature is selected, a License Information screen will appear, displaying the licensing information of your radio.

When the Reset button is pressed on the touchscreen, the system displays the options related to resetting the Uconnect system back to its default settings. These settings can clear personal data and reset selected settings from other menus.

Note:

Depending on the vehicle’s options, feature settings may vary.

Notifications Sounds

Turn this setting on or off to hear notification sounds throughout your system.

Restart Radio

This setting will restart the radio.

Reset App Drawer to Default Order

This setting will reset the app drawer to its factory default layout.

Restore Settings to Default

This setting will return all the previously changed settings to their factory defaults.

Clear Personal Data

This setting will display a pop-up that gives you the option to clear all personal data from the system, including Bluetooth® devices and presets.

Reset Wi-Fi Password for Projection

This setting will reset your Wi-Fi password for projection.

Factory Reset

This setting will factory reset the radio. It may cause the radio to restart multiple times and the backup camera, radio, SOS, and several driving assistance features will not be available. Once the system resets, you will need to turn the vehicle off then back on to complete the process.