Problems with 2003 Chevrolet Astro VEHICLE SPEED CONTROL

Throttle cable sticking due to outer layer of braided cable being frayed. routing of cable caused a kink in the outer jacket that frayed the outer layer of a braided cable from the gas peddle to the throttle body. this caused the throttle to open and remain at what ever point it was by the pushing the accelerator pedal causing uncontrollable acceleration. the cable was routed below a hose at the firewall pushing the outer jacket downward and was that way from the factory as far as i am aware. no hoses have been changed. replaced the throttle cable and routed it above the hose at the firewall to eliminate the downward pressure on the outer jacket and all is operating properly. dealer had no interest in fixing or investigating the problem without cost being incurred by me. made the repair myself with a new throttle cable obtained through a dealer parts department. *tr

Tl* - the contact called regarding the 2003 chevrolet astro. the contact stated while traveling at 30 mph the throttle cable stuck, and once the vehicle reached 40 mph, the contact pulled the vehicle over to the side of the road. she was able to restart the vehicle which continued to idle high. the contact stated that once at home the vehicle continued to idle high, and the throttle cable sheared off. the vehicle was towed to a chevrolet dealer, who replaced the throttle cable. the contact has the repair invoices. *ak update 4/23/07*tr