Radio operation
Type 1
Type 2 and Type 3
(a) Listening to the radio
Push these buttons to choose either anAM or FM station.
“AM”, “FM1” or “FM2” appears on the display.If your vehicle is equipped with satelliteradio broadcast system, when you pushthe “AM·SAT” button, “AM”, “SAT1”,“SAT2” or “SAT3” station appears on thedisplay. For details about satellite radiobroadcast, see “Radio operation (XM satelliteradio broadcast)” on page 260.
Type 1 and Type 2
Type 3
Push and turn this knob to step up thestation band or to step down.
Your radio automatically changes to stereoreception when a stereo broadcast is received.“ST” appears on the display. If thesignal becomes weak, the radio reducesthe amount of channel separation to preventthe weak signal from creating noise.If the signal becomes extremely weak, theradio switches from stereo to mono reception.In this case, “ST” disappears fromthe display.
Type 1
Type 2
Type 3
(b) Presetting a station
1. Tune in the desired station.
2. Touch one of the station selectorswitches (1−6) and hold it until abeep is heard. This sets the stationto the switch and the frequency appearson the switch.
Each switch can store FM1, FM2 and AM.To change the preset station to a differentone, follow the same procedure.
The preset station memory is cancelledwhen the power source is interrupted bybattery disconnection or a blown fuse.
(c) Selecting a station
Tune in the desired station using one ofthe following methods.
Preset tuning: Touch the switch (1−6) forthe station you want. The switch (1−6) ishighlighted in green and station frequencyappears on the display.
Manual tuning: Turn the “TUNE·FILE” and“TUNE” knob briefly. Each time you turnthe knob, the radio will step up or downto another frequency.
Seek tuning: Push the “SEEK·TRACK”button on either side. The radio will beginseeking up or down for a station of thenearest frequency and will stop on reception.Each time you push the button, thestations will be searched out one afteranother.
Type 1
Type 2
Type 3
Scan tuning: Push the “SCAN” button ortouch the “SCAN” switch (AM mode only)briefly. “SCAN” appears on the display.The radio will find the next station up ordown the band, stay there for a few seconds,and then scan again. To select astation, push the “SCAN” button a secondtime.
Preset scan tuning: Push the “SCAN”button or touch the “SCAN” switch (AMmode only) and hold it until you hear abeep. “P. SCAN” appears on the display.The radio will tune in the next preset stationup or down the band, stay there fora few seconds, and then move to the nextpreset station. To select a station, pushthe “SCAN” button a second time.
Type 1
Type 2
Type 3
(d) RDS (Radio Data System)
(1) Program type
Each time you touch the “TYPE ” or“TYPE 
” switch, the program typechanges as in the following:
ROCK
EASY LIS (Easy listening)
CLS JAZZ (Classical music and Jazz)
R&B (Rhythm and Blues)
INFORM (Information)
RELIGION
MISC
ALERT (Emergency message)
Type 1
Type 2
Type 3
When you touch the “TYPE ” or “TYPE”, “TYPE SEEK” switch appears. Touchthe switch and the system starts to seekthe station in the relevant program type.
Type 1
Type 2
Type 3
(2) Traffic program:
A station that regularly broadcasts trafficinformation is automatically located.When you touch the “TRAF” switch,“TRAF SEEK” appears on the display andthe radio will start seeking any traffic programstation.
If any traffic program station is not found,“NOTHING” appears and the previousmode returns.
If the traffic program station is found, thename for traffic program station is displayedand “TRAF” is lit for a while untiltraffic announcement is received.
Type 1
Type 2
Type 3
(3) Radio text
If the system receives a radio text fromRDS station, “MSG” appears on the display.Touch the “MSG” switch, and a textmessage is displayed on the screen.
Type 1
Type 2
Type 3
In case a text message is not acceptedin a screen, you can touch the “MSG”switch and hold it to display the rest ofthe message.
When the system can show the stationname, “RDS” appears on the display.Each time you touch the “MSG” switch,indication on the display changes from theband to the station name, a radio text inthis order. After six seconds passes, indicationreturns to the band.
Radio operation (XMr satellite radio broadcast)
To listen to a satellite radio broadcast inyour vehicle, an additional genuine Toyotasatellite receiver and antenna must bepurchased and installed, and the subscriptionto the XM satellite radio is necessary.
(a) How to subscribe to an XM satelliteradio
An XM satellite radio is a tuner designedexclusively to receive broadcasts providedunder a separate subscription. Availabilityis limited to the 48 contiguous states.
How to subscribe:
You must enter into a separate serviceagreement with the XM radio in order toreceive satellite broadcast programming inthe vehicle. Additional activation and servicesubscription fees apply that are notincluded in the purchase price of the vehicleand optional digital satellite tuner.For complete information on subscriptionrates and terms, or to subscribe to theXM radio, visit XM on the web atwww.xmradio.com or call an XM ’s ListenerCare at (800) 967−2346. The XM radio is solely responsible for the quality,availability and content of the satellite radioservices provided, which are subjectto the terms and conditions of the XM radio customer service agreement.
Customers should have their radio IDready; the radio ID can be found by selectingthe “channel 000” on the radio.For details, see the “Displaying the radioID” that follows.
All fees and programming are the responsibilityof the XM satellite radio and aresubject to change.
Satellite tuner technology notice:Toyota satellite radio tuners are awardedType Approval Certificates from XM SatelliteRadio Inc. as proof of compatibilitywith the services offered by the XM satelliteradio.
(b) Displaying the radio ID
Each XM tuner is identified with a uniqueradio ID. You will need the radio ID whenactivating XM service or when reportinga problem.
If you select the “CH 000” using the“TUNE·FILE” knob, the ID code of 8 alphanumericcharacters appears. If youselect another channel, display of the IDcode is canceled. The channel (000) alternatesthe display between the radio IDand the specific radio ID code.
(c) Listening to the satellite radio
Push the “AM·SAT” button to choose aSAT channel.
“AM”, “SAT1”, “SAT2” or “SAT3” appearson the display.
Turn this knob to select the next orprevious channel.
If you turn continuously, you can rapidlyscroll forward or down through the channels.
(d) Presetting a channel
1. Tune in the desired channel.
2. Touch one of the channel selectorswitches (1−6) and hold it until abeep is heard. This sets the channelto the switch and the frequencyappears on the switch.
Each switch can store three SAT channels.To change the preset channel to adifferent one, follow the same procedure.The preset channel memory is cancelledwhen the power source is interrupted bybattery disconnection or a blown fuse.
(e) Selecting a channel
Tune in the desired channel using one ofthe following methods.
Preset tuning: Touch the switch (1−6) forthe channel you want. The switch (1−6) ishighlighted in green.
Manual tuning within the channel category:Turn the “TUNE·FILE” knob. Theradio will step up or down the channel.Manual tuning within the current channelcategory: Push the “SEEK·TRACK”button on either side. The radio will stepup or down the channel within the currentchannel category. Touch the “TYPE SEEK”switch. The radio will step up the channelwithin the current channel category.
To scan the currently selected channelcategory: Touch the “TYPE SCAN” switchor push the “SCAN” button briefly.“SCAN” appears on the display. The radiowill find the next channel in the samechannel category, stay there for a fewseconds, and then scan again. To selecta channel, touch the “TYPE SCAN” switchor push the “SCAN” button a second time.
To scan the preset channels: Push the“SCAN” button and hold it until you heara beep. “P.SCAN” appears on the display.The radio will find the next preset channel,stay there for a few seconds, andthen move to the next preset channel. Toselect a channel, push the “SCAN” buttona second time.
(f) Channel category
Touch either “TYPE 
” or “TYPE 
”switch to switch to the next or previouscategory.
(g) Displaying the title and name
When you touch the “TEXT” switch, thesong/program title and the artist name/featureare displayed.
Up to 32 alphanumeric characters can bedisplayed. (Some information will not befully displayed.)
(h) If the satellite radio tuner malfunctions
When problems occur with the XM tuner, a message will appear on the display. Referring to the table below to identify the problem,take the suggested corrective action.
The XM Listener Care Center is also available on the phone, please call (800) 967−2346 during the following hours:Monday – Saturday: 6 a.m. – 2 a.m. Eastern TimeSunday: 8 a.m – 8 p.m. Eastern Time
NOTICE
This equipment has been tested andfound to comply with the limits for aclass B digital device, pursuant toPart 15 of the FCC Rules. Theselimits are designed to provide reasonableprotection against harmful interferencein a residential installation.This equipment generates, uses andcan radiate radio frequency energyand, if not installed and used in accordancewith the instructions, maycause harmful interference to radiocommunications. However, there isno guarantee that interference will notoccur in a particular installation.
If this equipment does cause harmfulinterference to radio or television reception,which can be determined byturning the equipment off and on, theuser is encouraged to try to correctthe interference by one or more ofthe following measures:
— Reorient or relocate the receivingantenna.
— Increase the separation betweenthe equipment and receiver.
— Connect the equipment into an outleton a circuit different from that towhich the receiver is connected.
— Consult the dealer or an experiencedradio/TV technician for help.
Information to user
Alternation or modifications carriedout without appropriate authorizationmay invalidate the user’s right to operatethe equipment.
This XM tuner supports “Audio Services”(Music and Talk) of only XM satellite radio and “Text Information”,linked to the respective “Audio Services”.*Text Information includes, StationName, (Artist) Name, (Song) Title andCategory Name.
Download Manual