Compact disc player operation (Type 1 and Type 2)
(a) Inserting or ejecting compact discType 1
Setting a single compact disc:
1. Push the “LOAD” button briefly.
The amber indicators at both ends of theslot blinking. The amber blinking indicatorschange to continuous green illumination.
2. Insert only one disc.
You can set a disc at the lowest emptydisc number.
After insertion, the set disc is automaticallyloaded.
If the label faces down, the disc cannotbe played. In this case, “CD CHECK” appearson the display.
If you need to insert the next disc, repeatthe same procedure to insert another disc.Setting all the discs:
1. Push the “LOAD” button until youhear a beep.
The amber indicators at both ends of theslot blinking. The amber blinking indicatorschange to continuous green illumination.
2. Insert only one disc.
The amber indicators blink.
3. Insert the next disc after the amberblinking indicators change to continuousgreen illumination.
4. Repeat this procedure until you insertall the discs.
To cancel the operation, push the “LOAD”button.
Your automatic changer can store up to 6discs.
If you do not insert the discs within 15seconds after pushing the “LOAD” button,the operation will be canceled automatically.
NOTICE
Do not insert one disc stacked on topof another one or feed them in continuously,to prevent discs from gettingstuck in the player.
Ejecting a single alone:
1. Touch the switch (1−6) to highlightthe disc number you want to eject.
2. Push the “
” button for the compactdisc briefly.
At this time, the amber indicators of theslot start blinking.
Ejecting all the discs:
Push the “” button for the compactdisc until you hear a beep.
The numbers of the trays where the compactdisc is not set are dimmed.
Type 2:
When you insert a disc, the player willautomatically start. To eject the disc,push the “” button.
(b) Playing a compact disc
Type 1:
Push the “DISC·AUX” button if the discis already loaded in the player.
“CD CHANGER” appears on the display.The discs set in the player are playedcontinuously, starting with the last discyou inserted. The disc number of the disccurrently being played, the track numberand the time from the beginning of theprogram are shown on the display.
When play of one disc ends, the firsttrack of the following disc starts. Whenplay of the final disc ends, play of thefirst disc starts again.
The player will skip any empty disc trays.
When the AUX adapter is in use, eachtime you push the “DISC·AUX” button, theaudio switches the compact disc modeand AUX mode alternately. For detailsabout AUX adapter, see page 278.
Type 2:
Push the “DISC·AUX” button if the discis already loaded in the player.
“CD” appears on the display.
The discs set in the player are playedcontinuously. The track number and thetime from the beginning of the programare shown on the display.
(c) Selecting a desired disc (Type 1 only)
Touch the desired disc number.
The selected disc number is highlighted ingreen.
The player will start playing the selecteddisc from the first track.
(d) Selecting a desired track
“SEEK·TRACK” button:
Push the “SEEK·TRACK” button. The playerwill start playing the selected trackfrom the beginning.
Track list screen:
Touch the desired track displayed on thetrack list screen.
The track list screen cannot be displayedwhile driving.
For details about the track list screen, see“Displaying the track list” on page 270.
(e) Fast Forward/Reverse
Push the “SEEK·TRACK” button and holdit to fast forward/reverse the disc. Whenyou release the switch, the player willresume playing.
When fast forwarding, if you reach theend of the final track, the player will goback to the start track and continue operation.
When reversing, if you reach the beginningof the start track, reverse is cancelled,even if you continue to hold downthe button.
(f) Repeating the same track
Touch the “RPT” switch briefly. When thetrack is finished, the player will automaticallygo back to the beginning of the trackand play the track again. To cancel it,touch the “RPT” switch once again.
(g) Repeating the same disc
Touch the “RPT” switch and hold it untilyou hear a beep. When the disc is finished,the player will automatically goback to the beginning of the disc and playthe disc again. To cancel it, touch the“RPT” switch once again.
(h) Listening to the tracks in the discyou are listening to, in random order
Touch the “RAND” switch briefly, the systemselects a track in the disc you arecurrently listening to. To cancel it, touchthe “RAND” switch once again.
(i) Listening to the tracks in all thediscs set, in random order
Touch the “RAND” switch and hold it untilyou hear a beep, the system selects atrack in all the discs which are set andplays it. To cancel it, touch the “RAND”switch once again.
(j) Searching for a desired track
Touch the “SCAN” switch briefly, the playerwill play the next track for 10 seconds,then scan again. To select a track, touchthe “SCAN” switch a second time.
After all the tracks are scanned in onepass, normal play resumes.
(k) Searching for a desired disc(Type 1 only)
Touch the “SCAN” switch and hold it untilyou hear a beep, the track at the beginningof each disc will be played for 10seconds. To continue listening to the trackof your choice, touch the “SCAN” switcha second time.
After all the discs are scanned in onepass, normal play resumes.
(l) Displaying the track list
Touch the “TRACK LIST” switch.
The track list screen will be displayed.
If there are more than 6 tracks, touch “
”or “ ” to change the page.
If you touch a track, that track will beplayed.
Only track names of 13 characters or lesscan be displayed. Furthermore, tracknames may not be displayed correctly orat all, depending on the recorded content.
(m) If the player malfunctions
If the player or another unit equipped withthe player malfunctions, your audio systemwill display the following error messages.
If “CD CHECK” appears on the display,it indicates that the disc is dirty, damagedor it was inserted up side down. Clean thedisc or insert it correctly.
If “CD ERROR” appears on the display,the following causes are possible.
- There is trouble inside the system.Eject the disc.
- The inside of the player unit may betoo hot due to the very high ambienttemperature. Eject the disc and allowthe player to cool down.
If the malfunction is not rectified, takeyour vehicle to your Toyota dealer.
Compact disc player operation (Type 3)
(a) Inserting or ejecting compact disc
When you insert a disc, the player willautomatically start. To eject the disc,push the “
” button.
(b) Playing a compact disc
Push the “DISC” button if the disc isalready loaded in the player.
“CD” appears on the display.
The discs set in the player are playedcontinuously. The track number and thetime from the beginning of the programare shown on the display.
(c) Selecting a desired track
“SEEK·TRACK” button: Use for directaccess to a desired track.
Push either side of the “SEEK·TRACK”button. The player will start playing theselected track from the beginning.
Fast forward: Touch the “
” switch andhold it to fast forward the disc. When yourelease the switch, the compact disc playerwill resume playing from that position.
Reverse: Touch the “
” switch and holdit to reverse the disc. When you releasethe switch, the compact disc player willresume playing.
(d) Searching for a desired track
Touch the “SCAN” switch.
“SCAN” will be highlighted in green. Thecompact disc player will play the nexttrack for 10 seconds, then scan again.To select a track, touch the “SCAN”switch a second time. If the player reachesthe end of the disc, it will continuescanning at track 1.
After all the tracks are scanned in onepass, normal play resumes.
(e) Other compact disc player functions
“RPT” switch: Use it for automatic repeatof the track you are currently listening to.
Touch the switch while the track is playing.When the track is finished, the playerwill automatically go back to the beginningof the track and play the track again. Tocancel it, touch the switch once again.
“RAND” switch: Use it for automatic andrandom selection of the disc which youare currently listening to.
When the switch is touched, the systemselects a track in the disc you are currentlylistening to. To cancel it, touch theswitch once again.
“TITLE” switch: Use it for displaying thedisc and track title while the CD−TEXTdisc is playing.
The switch is not displayed on the screenwhile the CD−TEXT disc is not playing.Up to 29 letters can be displayed. Tocancel it, touch the “TITLE OFF” switch.
(f) If the player malfunctions
If the player or another unit equipped withthe player malfunctions, your audio systemwill display the following error messages.
If “CD CHECK” appears on the display,it indicates that the disc is dirty, damagedor it was inserted up side down. Clean thedisc or insert it correctly.
If “CD ERROR” appears on the display,the following causes are possible.There is trouble inside the system.Eject the disc.
The inside of the player unit may betoo hot due to the very high ambienttemperature. Eject the disc and allowthe player to cool down.
If the malfunction is not rectified, takeyour vehicle to your Toyota dealer.
Download Manual