USB power supply
When a device that communicates with a PC is connected, power supply or charging may not be possible.When connect a device for charging, disconnect the device promptly after charging is completed.
& How to use the USB power supply
NOTE
The rated voltage of each USB terminal is DC 5 V/2.1 A (total 4.2 A). Before connecting a device, be sure to read the instruction manual of the device and check whether or not this specification of the output is supported by the device. If a device that requires power exceeding the maximum rating is connected, power supply or charging may not be possible. Even if charging could be completed, the time required for charging may be longer than when the genuine charger for that device is used.
Depending on the device, charging may be possible only when a special cable is used. In this case, be sure to connect the device using the special cable.
Front seat USB power supply (An audio device can be connected and used)
Console USB power supply (power supply function only) (if equipped)
Use the USB terminal to use or charge an electronic device.
When using the terminal, open the USB power supply cover. After use, close the USB power supply cover.
When the ignition switch is in the “ACC” or “ON” position, the power can be supplied to the electronic device. Up to DC 5 V/2.1 A can be supplied from each terminal (total of 4.2 A).
Download Manual