Disclaimer: Not affiliated with or endorsed by RAM Motor Company. For informational purposes only. Full Disclaimer

Problems with 2016 RAM 3500 VEHICLE SPEED CONTROL

On average, the 2016 RAM 3500 starts to “feel” problems with the VEHICLE SPEED CONTROL and its various aspects after 21 353 miles.

Recently reported VEHICLE SPEED CONTROL problems on 2016 RAM 3500

Vehicle fails to move when you depress the accelerator pedal. from a dead stop to pull out into traffic it doesn't move at all for approximately 5 to 10 seconds. it is worse when towing a load. it is also slow to respond when driving at speed. it is extremely dangerous!!!!

Delayed throttle response. also fumes in cab.

There is an extreme delay when pressing the accelerator and actual acceleration of the vehicle. there seems to be no correlation between how far the accelerator is pressed and vehicle acceleration. when merging into traffic and especially when pulling out into traffic or passing a vehicle. this delay is a severe safety problem. there is a 2-3 second delay between pressing the accelerator and the vehicle actually moving. *tr

Dead pedal. from a dead stop if you stab the accelerator pedal as in a emergency situation there is a 2-3 second delay before power is applied to the drivetrain. i feel this is a very dangerous situation and ram should have to reprogram these trucks to apply power when called for by the accelerator pedal. this has occured since new

Tl* the contact owns a 2016 dodge ram 3500. while driving at an unknown speed, the speedometer failed to display the proper mileage without warning. the vehicle was not diagnosed nor repaired. the manufacturer was notified of the failure. the failure mileage was 1,060.

Other 2016 RAM 3500 Problem Categories